Advertisement
Right-Hand Panels
At the bottom end of the right-hand moving panel,
disengage, if necessary, the two catches with the turngrip
levers.
Position the moving right-hand panel with the rollers up
and the magnet side towards the right-hand fixed panel.
Fit the first roller (nearest magnet side of moving panel)
into the top track roller groove of the fixed panel.
Fit the second roller (near outside edge of moving panel)
into the groove and slide the right-hand moving panel into
the top track of the right-hand fixed panel.
Left-Hand Panels
At the bottom end of the left-hand moving panel,
disengage, if necessary, the two catches with the turngrip
levers.
Position the moving left-hand panel with the rollers up and
the magnet side towards the left-hand fixed panel.
Fit the first roller (nearest magnet side of moving panel)
into the top track roller groove of the fixed panel.
Fit the second roller (near outside edge of moving panel)
into the groove and slide the left-hand moving panel into
the top track of the left-hand fixed panel.
C. INSTALL WALL JAMB / EXPANDER
JAMB ASSEMBLY
Position each wall jamb/expander jamb assembly onto
the top and bottom tracks.
Align each end of the assemblies with the top and bottom
track screwports and fasten with twelve #6-20 x 1"
panhead screws but do not tighten.
Kohler Co., Kohler, WI
Turngrip Lever
Catch in the
Disengaged Position
Right-Hand
Moving Panel
Magnet Side
Right-Hand
Fixed Panel
Bottom
Top/Bottom
Track
Wall Jamb/Expander Jamb Assembly
#6-20 x 1" Panhead Screw
Bottom
3
Catch Stops
Turngrip Lever in the
Disengaged Position
Rollers
Rollers
Top
Left-Hand
Moving Panel
Magnet Side
Left-Hand
Fixed Panel
Top
AB
116897-2-
Advertisement
