Network Connections - Aiphone IS Series Quick Start Programming Manual

Step 2:
Confi gure PC's IP Address (not required if using a DHCP server)
The default IP address for each IS-IP device is https://192.168.0.40. The PC will need to be set in the same subnet in
order to connect to the IS-IP devices.
A. Open Control Panel
- Windows XP (classic view)
®
Connection Status window.
- Windows 7 (Category View)
®
Local Area Connection to open the Local Area Connection Status window.
- Windows 8 (Category View)
®
the active network adapter to open the Local Area Connection Status window.
B. Click the Properties button to open Local Area Connection Properties window.
C. Scroll down and left click Internal Protocol (TCP/IP) then click Properties button to open Internet Protocol
Properties window.
D. Select the Use the following IP address radio button. Type in the IP address 192.168.0.100 (the last number
can be any valid host address except 40) and change the subnet mask to 255.255.255.0. Click [OK].
E. Click [OK] in the Connection Properties window to accept these changes.
Step 3:
Log into IS-CCU (if using the IS-CCU)
When using the IS-CCU with the IS-IPC, the IS-CCU will need to be changed from a "local" system to an "IP" system.
A. Using Internet Explorer, point the address bar to https://192.168.0.30. If using DHCP, enter the unit's IP address
discovered with the IS_IPSEARCH program and hit [Enter].
Note: ensure that https (for security) is being used in the address bar.
B. A security certifi cate error message will appear. Click "Continue to this website."
C. Choose preferred language.
D. Log in to the unit using the default administrator ID "aiphone," and default password "aiphone".
E. Click the Standard system (IP system) radio button.
Figure 3.1: System confi guration setting
F. Click Temporarily stored to save changes.
G. Click Updating the system from the menu on left.
H. Click Update to update the IS-CCU unit with all stored data.

Network Connections

Network and Internet
Network and Internet
Double click Local Area Connection to open
View network status and tasks
View network status and tasks
Click
Click
3