CaryMart 0020116 Manual

Mini Wireless Remote Control Vibrator Reminder System
Package Include:
1 x Vibrator: Z-02
1 x Transmitter: CP-8
1 x User manual
Application:
This vibrator is a very small electric device that can produce multiple vibrations, it and the transmitter form a remote control vibration kit. When you
press different buttons on the transmitter, the vibrator will vibrate different times. They can be use for any kind Silent Reminders occasion, such as
magic, reminder, negotiation, nursing, deaf-mute, old man, patient, pet etc.
Feature:
Wireless control.
Small size for easy carrying.
You can control the vibrator by the transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
Reliable control: The code has thousands of different combinations, and the vibrator only works with the transmitter which use the same code.
One/several transmitters can control one/several vibrators simultaneously.
You can use two or more units in the same place.
Vibrator Parameters:
Model: 0020116 (Z-02)
Working Mode: Multiple Vibrations
Working Frequency: 433.92MHz
Power Supply: 1 x AAA 1.5V Battery (included)
With power switch on the side.
Operating Temperature: -20°C to +70°C
Size: 51mm x 30mm x 14mm
Matching Transmitters:
The vibrator can work with different transmitters, such as model C-4 (100M), CWB-4 (50M, waterproof), CP-4 / CP-8 (500M), CB-4 / CB-6 / CB-8 /
CB-12 (1000M) etc. You can set any button of the transmitter to trigger the vibrator to vibrate any number of times.
Working Range:
With a transmitter (such as model CP-8) to form a complete set, the maximum working distance can reach 200M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
maximum working distance.
If you want to have a further working range, you can use a powerful transmitter, such as CB-8 transmitter.
Transmitter Parameters:
Model: CP-8
Channel / Button: 8
Button Symbol: 1, 2, 3, 4, 5, 6, 7, 8
Operating Voltage: 12V (1 x 23A-12V battery, can be used for 12 months)
Operating Current: 8mA
Working Frequency: 433.92MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 500m / 1500ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20°C to +70°C
Size: 85mm x 36mm x 16mm
Usage:
Press the button 1 of the transmitter, the vibrator vibrates once.
Press the button 2 of the transmitter, the vibrator vibrates twice.
............
Press the button 7 of the transmitter, the vibrator vibrates seven times.
Press the button 8 of the transmitter, the vibrator vibrates eight times.
Note: You can set any button of the transmitter to trigger the vibrator to vibrate any number of times.
How to pair the transmitter to the vibrator:
1) Turn on the power switch of the vibrator, and the vibrator vibrates once.
2) If you want to set the button 1 for 1 times of vibration: Press the learning button once in the vibrator, and the vibrator vibrates once. Then press the
button 1 on the transmitter, if the vibrator again vibrates once, it means learning is successful.
3) If you want to set the button 2 for 2 times of vibration: Press the learning button twice in the vibrator, and the vibrator vibrates once. Then press the
button 2 on the transmitter, if the vibrator again vibrates once, it means learning is successful.
4) If you want to set the button 3 for 3 times of vibration: Press the learning button three times in the vibrator, and the vibrator vibrates once. Then
press the button 3 on the transmitter, if the vibrator again vibrates once, it means learning is successful.
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com