Download Print this page
CaryMart 0020221 Manual

CaryMart 0020221 Manual

Rf wireless receiver

Advertisement

Quick Links

RF Wireless Receiver (Model 0020221 S4X-AC220-ANT3)
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehi c le,
ship, offshore operation, aerial vehi c le, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens,
locks, motors, fans, w inches, blinds, linear actuators, doors, windows, electric solenoid val v es, security alarm, business signs and various
devices.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), w idel y used in US, Canada... and voltage of AC220V (200V~240V), used in UK,
France...
AC Power Output: It can control AC equipment w ith voltage 110V / 120V / 220V / 240V AC.
Each channel can work at maximum current 10A, such as 120W/12V, 60W/6V, 90W/9V, 240W/24V, 1100W/110V, 2200W/220V.
With w
ired control
terminals: You can connect sensors, limit sw itches, manual sw itches or external devices to control the receiver.
With the external antenna, it can have a further working range.
You can turn on/ off the receiver w ith transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter w hi c h use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Working Range:
With a transmitter (such as CB-4) to form a complete set, the maximum w orking distance can reach 2000M in an open ground.
The maximum w orking distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it
will be hindered by trees, walls or other constructions, and w ill be interfered by other wireless signals. Therefore, the actual distance may not
reach thi s maximum w orking distance.
Receiver Parameters:
Model No.: S4X-AC220-ANT3
Pow er Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Working Frequency: 315MHz / 433MHz
Channel: 4 CH
Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
PCB size: 140mm x 73mm x 18mm
Case size: 192mm x 100mm x 45mm
External Telescopic Antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
With SMA connector.
If you stretches the external telescopic antenna, it can have a further working range.
Matching Transm itters:
The receiver can work with di f ferent transmitters, such as model C-4 (100M), CWB-4 (50M, w aterproof), CP-4 (500M), or CB-4 (1000M) etc.
Usage (with the transmitter CB-4):
The receiver can be used to control AC 110~240V equipments.
Wiring:
If you want to control the AC 110V/220V lamps, do as following:
1) Connect the live w i r e of AC pow er supply to terminal "L / +" of INPUT, and connect the neutral w ire of AC pow er supply to terminal "N / -" of
INPUT.
2) Connect one side of AC lamp to terminal "L / +" of OUTPUT, and connect another side of AC lamp to terminal "N / -" of OUTPUT.
Setting different control modes :
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
follow ing):
1) Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button A: Terminals OUT1 outputs DC pow er, the lamp 1 is on. Press button A again: Terminals OUT1 stops outputting, the lamp 1 is off.
......
Press button D: Terminals OUT4 outputs DC pow er, the lamp 4 is on. Press button D again: Terminals OUT4 stops outputting, the lamp 4 is off.
2) Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com
E-Mail: sale@carymart.com

Advertisement

loading

Summary of Contents for CaryMart 0020221

  • Page 1 RF Wireless Receiver (Model 0020221 S4X-AC220-ANT3) Feature: Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehi c le, ship, offshore operation, aerial vehi c le, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, w inches, blinds, linear actuators, doors, windows, electric solenoid val v es, security alarm, business signs and various devices.
  • Page 2 Operation: Press and hold the button of receiver until signal LED flashes slow l y ; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully. SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: sale@carymart.com...
  • Page 3 Status LED 1 Relay 4 Relay 3 Relay 2 Relay 1 INPUT OUT4 OUT3 OUT2 OUT1 Neutral Wire Live Wire Lamp 4 Lamp 3 Lamp 2 Lamp 1 AC Power Supply DC0~28V SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: sale@carymart.com...

This manual is also suitable for:

S4x-ac220-ant3