Smart Key Battery Replacement; Wearable Key Battery Replacement - TATA Motors Nexon Owner's Manual

 Keep the recommended inflation
pressure. Over-inflation, in particu-
lar, may cause puncture or bursting
of tyre.
NOTE
Life and wear pattern of tyres de-
pends on various parameters like
tyre pressure, wheel alignment,
wheel balancing, tyre rotation, etc. It
also largely depends on vehicle
speed, load carried, usage, driving
habits, road conditions, tyre quality,
etc. In case fault is suspected to be
due to poor quality of tyres, the
same may be taken up with con-
cerned tyre manufacturer.

Smart Key Battery Replacement

(For PEPS variant)
Procedure:
Open rear side of key (battery cover).
1.
Replace with new battery in the
2.
smart key battery slot.
Ensure that the "+" symbol on the
3.
battery is facing upwards. The cor-
rect polarity is shown on the battery
cover.
Close the battery cover.
4.
MAINTENANCE
Make sure that the key cover is intact
5.
properly.
NOTE

Use CR battery only.
2032

An inappropriately disposed
battery can be harmful to the
environment and
health. Dispose the battery
according to your local law(s)
and regulation.

Wearable key battery replacement

procedure
Battery status of the wearable key fob:
 If customer presses the driver door
handle switch or tailgate switch for
times with valid wearable and if the
3
passive entry is not working, the
wearable key fob's battery is low.
 As standby he can use Smart Key
(UID) or emergency key for entry
 Customer to contact nearby dealer or
service station for battery replace-
ment
human
-
2
185