Summary of Contents for Pasport Smart Gate PS-2180
Page 1
Mounting Rod velocity, and acceleration. Sensor Extension Cable (PS-2500) The sensor is designed to work with a PASPORT-compatible interface (such as the PS-2100 USB Link) and data collec- tion software (such as PASCO Capstone or SPARKvue) to Required Items* record, display, and analyze the motion.
Page 2
S m a r t G a t e Introduction The Auxiliary Port (number 3) accepts a 1/4” (6.35 mm) Compatible Equipment tip-ring-sleeve “phono” plug similar to the illustration. The Smart Gate can be used with a variety of PASCO equip- ment: Phono Plug Product Name*...
Page 3
M o d e l N o . P S - 2 1 8 0 I n t r o d u c ti o n • Connect the other end of the cable to a PASPORT input Gate, only Detector Port 1 (“gate 1”) will record state port of a PASCO interface.
Page 4
S m a r t G a t e Introduction and the Smart Gate can be adjusted up or down. If you wish to adjust the Smart Gate to an angle relative to the Photogate Smart Bracket, mount the bracket on the track with the smooth side Gate ME-6663 of the bracket against the edge of the track.
Refer to the experiment guide that comes with your entific, is prohibited. Trademarks PASCO, PASCO Capstone, PASCO equipment. PASPORT, and SPARKvue are trademarks or registered trademarks of PASCO scientific, in the United States and/or in other countries. • Also, check the PASCO web site. Find the web page for For more information visit www.pasco.com/legal.