Page 1
PASCO Data Collection Software (See www.pasco.com for details) Introduction The PASCO Model PS-2163 Soil Moisture Sensor works with a PASCO interface to collect soil moisture data. The sensor consists of the Soil Moisture Sensor box and the Soil Moisture Probe (cable assembly).
Page 2
S o i l M o is t u r e S e n s o r 012-10538C Introduction material and air pockets. A typical volumetric ratio would be 55% solid material and 45% air pockets. As water enters the soil, the air pockets begin to fill with water.
2. Connect the Soil Moisture Sensor to a PASPORT-compatible interface. sensor box in only one way. 3. If you will be using a computer, connect the PASPORT-compatible 3. If you will be using a computer, connect the PASPORT-compatible interface to the computer.
Page 4
S o i l M o is t u r e S e n s o r 012-10538C Setup SPARKvue 1. Start the SPARKvue software program. If the sensor is connected and recognized by the software, the SPARKvue Home Screen will show the name of the sensor (Soil Moisture) and the list of its measurements.
Page 5
P S - 2 1 6 3 012-10538C Se t u p voltage output from the Soil Moisture Probe to VWC values for several soil samples with different degrees of dryness, and then plot a graph of VWC versus probe output in millivolts (mV). The basic process is to collect a measured volume of bulk soil, measure its mass, measure the probe reading in mV for the bulk soil, dry the soil to quadratic...
Page 6
S o i l M o is t u r e S e n s o r 012-10538C Setup Calculations: 1. Determine and record the volume of water by subtracting the dry soil mass from the “wet” (pre-dried) soil mass. Convert the mass difference into a volume based on the density of water (1 g/cm 2.
Evaluate soil moisture content for various species of plants to determine the optimal level of soil moisture. • Examine soil moisture content in a greenhouse to determine the amount of irrigation. Specifications (PS-2163) Sensor Range 0 to 45% volumetric water content in soil Accuracy ± 4% Resolution 0.1%...
2. Connect the Soil Moisture Sensor to a PASPORT-compatible interface. The Soil Water Potential Probe does not require any 3. If you will be using a computer, connect the PASPORT interface to the calibration by the user. computer’s USB port.
Instruction Manual, visit the PASCO Web site at www.pasco.com/manuals and enter the product name or number (PS-2163) in the Search text area. Limited Warranty For a description of the product warranty, see the PASCO catalog or check the PASCO website at www.pasco.com/legal. Copyright This PASCO scientific Instruction Manual is copyrighted with all rights reserved.
Page 10
S o i l M o i s t u r e S e n s o r 012-10538C T e c h n i c a l S u p p o r t The European Union WEEE (Waste Electronic and Electrical Equipment) symbol (to the right) and on the product or its packaging indicates that this product must not be disposed of in a standard waste container.