Advertisement
Battery installation
15. Cell
16. Battery box
Filling with soap and soap release
•
Pour the desired amount of
liquid soap into the soap tank
(Fig. 4).
•
Replenish liquid soap regularly. You can observe the fill level through the window (8),
located on the front of the soap dispenser.
• Unlock the battery compartment cover
• Insert 4 cells (1.5V AA LR6) into the
Fig. 3
Fig. 4
•
Release the desired amount of liquid soap while
holding hand under the soap dispenser. The
infrared sensor (2) located below allows for
precise dosing of liquid soap (Fig. 5).
(4) using the key (5), open it and
remove the battery box (16).
battery box observing the "+" and "-"
poles. Put the battery box back to its
original position and close the cover of
the battery compartment. (Fig. 3)
Fig. 5
- 7 -
Advertisement
