View Menu - Rehau PD1 Instructions Manual

View Menu

(1 of 1) – User access level
Room Target
The current desired air temperature for the space. This item is only available in the
Installer access level. (Must have an active air sensor.)
Room
The current air temperature for the space. If the optional sensor is not used for the
floor/slab but for the room, this is the average temperature.
Outdoor
The current temperature at the outdoor sensor . (Sens 2 must be set to Out.)
the average of all active air sensors.)
Slab
The current slab temperature.
Remote
The current temperature at the remote sensor. (Sens 1 must be set to Rem.)
Page 8 of 19
(Must have an active slab sensor.)
is