CaryMart S1PU-AC-ANT3 Manual

Water Tank Water Level Wireless Automatic Remote Control System

Package Include:

1 x Receiver: S1PU-AC-ANT3
1 x Transmitter: CB-2
1 x Transmitter: CB-2N-2
2 x Water Level Sensors
1 x User manual

Working Principle:

Transmitter CB-2N-2 is a special remote control with normally open contact trigger. It has 3 input wires for connecting two devices with normally
open contact, such as warning host, cable detectors, various sensors, limit switches, Programmable Logic Controllers and so on.
This transmitter can be combined with different types of receivers to form a wireless control system, and this system is used to wirelessly control the
device A through the device B with normally open contact.

Application:

You can connect two water level sensors to this transmitter, and connect the water pump to the receiver, then the pump will automatically work
according to the water level.
When the water reaches the low water level, the water level sensor 1 is triggered, the transmitter automatically emits a wireless signal "ON". When
the receiver receives this wireless signal, it will turn on the pump motor to pump water into the tank.
When the water reaches the high water level, the water level sensor 2 is triggered, the transmitter automatically emits a wireless signal "OFF".
When the receiver receives this wireless signal, it will turn off the pump motor to stop pumping water.

Feature:

Wireless control, easy to install
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Automatic control AC110~240V water pump motors by two water level sensors.
Universal input: Support 110V AC (100V~120V) used in US, Canada, etc, and 220V AC (200V~240V) used in Germany, UK, France, etc.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally
open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
High Power: Maximum load current 30A.
With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.
With external telescopic antenna, the receiver have a farther working range.
You can control the pump by the receiver with the transmitter from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver:

Model No.: S1PU-AC-ANT3
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-12 AWG
Working Frequency: 315MHz
Channel: 1CH
Control Modes: Interlocking
Quiescent Current: ≤6mA
Maximum Load Current: 30A
Operating Temperature: -20°C to +70°C
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x 68mm x 50mm

Transmitters:

Model No.: CB-2
Channel / Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Working Current: 30mA
Operating Frequency: 315MHz
Modulation Mode: ASK
Transmitting Distance: 1000m / 3000ft (theoretically)
With power switch on the side.
Operating Temperature: -20°C to +70°C
Unit size: 135mm x 42mm x 25mm
Model No.: CB-2N-2
With External Trigger Wires.
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com