Battery Use And Charging - mTrigger Biofeedback User Manual

Recommendation: Charge the device before use. The system ships with the device
battery only partially charged.
Recommendation: Turn device off before charging. If device is on during active
charging, LEDs cannot indicate a full charge and full charge will take longer.
Note: Device cannot be used for feedback while charging as Bluetooth capabilities are
disabled during active charging.

3.3: Battery Use and Charging

Warning: Do not modify the battery or attempt to remove it from device.
Warning: Do not immerse the battery in water or get the battery wet.
Caution: mTrigger hardware cannot establish a Bluetooth connection while in a
charging state. Do not attempt to use the mTrigger device/system while charging.
Caution: DO NOT leave device charging overnight; charging time in excess of 6
hours can cause over-charging and impact battery life and device performance.
Caution: The temperature range for charging this battery is -10° C to 45 C (14
F to 113 F). Do not charge, store, or attempt to use the battery outside of this
range.
Individual Unit, Clinical Bundle User Manual mTrigger™ Biofeedback System | V2-d3 | 03-01-21 Page 6 of 27