Maintenance And Calibration; Cleaning - mTrigger Biofeedback User Manual

16) Slide the power button up to shut down the device when training is completed.
Bluetooth will disconnect automatically upon powering device off or force closing
app.

6| Maintenance and Calibration

Warning: DO NOT attempt to gain access to any internal component. Doing so
may cause injury and/or device damage. THERE ARE NO USER-SERVICEABLE
COMPONENTS inside this device.

6.1: Cleaning

Warning: Always turn off the device before cleaning and remove from charger.
Keep EMG ports and sensing cable jacks clear from dirt, dust, and debris. These
substances will impact signal quality and device functionality and over the long term could
cause device damage.
If cleaning is necessary, use a dry dusting cloth.
Warning: DO NOT use water or a damp cloth to clean any part of the mTrigger
Biofeedback System; no component of the system is waterproof.
Individual Unit, Clinical Bundle User Manual mTrigger™ Biofeedback System | V2-d4 | 06-01-21 Page 21 of 27