Table of Contents
Advertisement
3-4
3.2.4
Heading bump
When HEADING MODE is active, the target heading can be adjusted
without disengaging SeaStation. Simply press the Heading button on the
display run screen and follow the screen information.
For large target heading changes (e.g. greater than 45°) it is recommended
that you manually adjust the heading using the joystick then re-engage
SeaStation.
Figure 3-3. Heading Bump Screen.
3.3 Station transfer
Transferring to another station functions as it does in normal joystick use.
SeaStation is disengaged when control is transferred and is not automatically
resumed when control returns.
WARNING!
Never leave the active helm while SeaStation is engaged. Always disengage
SeaStation prior to station transfer or have another operator take command
at the alternate station.
3.4 SeaStation tips
WARNING!
SeaStation positions the vessel in a general area. Only engage SeaStation
if your vessel is a safe distance from surrounding objects such as docks
or buoys.
The following are tips on how to get best results from SeaStation:
• Grab the joystick at any time for immediate control (This will
disengage SeaStation).
• SeaStation acquires your target position or heading when Engage is
pressed on the display.
EN
Advertisement
Table of Contents
