Canon F-718S User Manual page 35

. Input the start, end
• Input the value, press
screens
• Input expression and display result value in following
screens are in Line mode status
• There are maximum of 0 x-values for generate function
table. The Insufficient Error will be showed if you input
the start, end, step value combination is more than 0
x-values.
Display screen
Start
End
Step
In Function Table Result screen, you cannot edit the content,
and press
f ( x) = x
Example:
the range
Key in operation
step information
Input the lower limit of X (Default =1).
Input the upper limit of X (Default = ).
End value must be greater than the start value.
Input the increment step (Default =1).
return to Function Input screen.
3 2
+ 3x 2x
to generate the function table for
, incremented in steps of 1.
to confirm on the following
You should input:-
Display
f(x)=
3 2
f(x)= X + X -2X