General Warnings - Riello RG1 Installation, Use And Maintenance Instructions

1

General warnings

1.1 Guarantee and responsibility
The rights to the guarantee and the responsibility will no longer
be valid in the event of damage to things or injury to people, if
such damage/injury was due to any of the following causes:
 intervention of unqualified personnel;
 carrying out of unauthorised modifications on the equipment;
 powering of the burner with unsuitable fuels;
 faults in the fuel supply system;
 repairs and/or overhauls incorrectly carried out;
 use of non-original components, including spare parts, kits,
accessories and optional;
 force majeure.
1.2 Installation safety notes
It is obligatory to carry out all installation, mainte-
nance and dismantling operations with the elec-
tricity supply disconnected.
DANGER
Isolate the fuel supply.
DANGER
The installation must be carried out by qualified
personnel, as indicated in this manual and in com-
pliance with the standards and legal requisites in
WARNING force.
After removing all the packaging, check the integ-
rity of the contents. If in doubt, do not use the kit;
contact the supplier.
CAUTION
2901898
General warnings
The manufacturer furthermore declines any and every responsi-
bility for the failure to observe the contents of this manual.
– Personnel must always use the personal protective equip-
ment envisaged by legislation and follow the indications giv-
en in this manual.
– Personnel must observe all the danger and caution indica-
tions shown on the machine.
– Personnel must not carry out, on their own initiative, opera-
tions or interventions that are not within their province.
– Personnel must inform their superiors of every problem or
dangerous situation that may arise.
15 GB
Wait for the components in contact with heat
sources to cool down completely.
After carrying out maintenance, cleaning or
checking operations, reassemble the hood and all
the safety and protection devices of the burner.