Space Requirements; Leveling The Appliance; Moving The Appliance; Preparations For Use - Haier HMBM-686SNF User Manual

Space requirements

Width: 595mm
Depth: 635mm
Height: 1855mm
A: 966mm
B: 1176mm
C: 130°
E: 50mm
F:100mm
Note：Figure 1, Figure 2 only illustrate the space demand of the product.

Leveling the appliance

The appliance should be placed on a flat and solid surface
1. Tilt the appliance slightly backwards
2. Turn the feet clockwise to raise the refrigerator;
3. Turn the feet counterclockwise to lower the refrigerator;

Moving the appliance

1. Remove all food and unplug the appliance
2. Secure shelves and other moveable parts in the fridge and in the freezer with adhesive tape
3. Do not tilt the refrigerator more than 45° to avoid damaging the refrigerating system

Preparations for use

1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately.
Make sure to energize the refrigerator after more than 1 hour's standing, so as to ensure its
normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the refrigerator
door, if the temperature inside the refrigerator compartment drops obviously, it indicates the
refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user's temperature setting. After the refrigerator is fully
cooled, put in foods, which usually need 2~3 hours to be fully cooled. In summer, when the
temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try to open the
refrigerator door as less as possible before the internal temperature cools down).
13