2.8 UNIT PARAMETERS
VOICE FREQUENCY PARAMETERS
Transmission Levels
Transmit and Receive levels for the 86445-32 2W FXS unit are software
adjustable in 0.1 dB steps within the following ranges:
Line Impedance
Line Impedance for the 86445-32 2W FXS unit is software selectable to 600Ω,
900Ω, 600Ω+2.16µF, or 900Ω+2.16µF.
Network Build-Out Capacitance
Network Build-Out Capacitance for the 86445-32 2W FXS unit is software
selectable to 0 nF, 4.7 nF, or 10 nF.
Frequency Response
End-to-End Frequency Response specifications for the 86445-32 2W FXS unit
are as per the table below (measured from the paddleboard, with 86445-42 2W
FXO unit at the far end).
Frequency (Hertz)
60
200
300 to 3000
3000 to 3400
4000
Table 17: End-to-End Frequency Response
Copyright GE Multilin Inc. 2002
Signal
Test Tone Level (0 dbm0)
Transmit
Receive
Table 16: Transmission Levels
Loss (dB)
342-86400-445PS
Issue 4.0
October 2006
Page 73
-9.5 to +5.0 dBm
-15.0 to +5.0 dBm
Relative to 1kHz @ 0 dBm0
>20
-0.5 to +5.0
-0.3 to +0.8
-0.3 to +2.0
>28