Paddleboard Connections; Paddleboard Installation; Figure 4: 86445-91 Single-Channel 2W Fxs Unit Paddleboard - GE JungleMUX 86445-31 Technical Practice And Installation Manual

Paddleboard Connections

Each 86445-31 2W FXS unit requires one 86445-91 Paddleboard Assembly.
The paddleboard enables customer connections for Tip and Ring signals and
optional external ringing voltage and control. Figure 4 details the Paddleboard
connections.
2W
FXS/FXO
PADDLEBOARD
TB1
J1
8
C1 A1
7
6
5
4
3
2
1
C16 A16
86445 - 91
Notes:
If Talk Battery and Ring Generator signals are provided externally, the unit's
sub-assembly board 087-86445-04 must be removed.
The external Talk Battery voltage range is -21V to -58V.
For unit strapping options refer to Table 1.

Figure 4: 86445-91 Single-Channel 2W FXS Unit Paddleboard

Paddleboard Installation

1. Place the paddleboard onto designated slot position ensuring that the rear
connectors are fully mated. Ensure correct orientation of the paddleboard
prior to insertion.
2. Secure the paddleboard in position using the fixing screws provided.
Copyright  GE Multilin Inc. 2002
8 RACK GROUND - STRAP TO PIN 3
7 BATTERY GROUND
6 BATTERY VOLTAGE (SEE NOTES BELOW)
5 RINGING CONTROL VOLTAGE
4 RINGING VOLTAGE
3 RACK GROUND - STRAP TO PIN 8
2 RING
1 TIP
342-86400-445PS
Issue 4.0
October 2006
Page 25