Set Id Setup; Power Saving; Hcec Setup - LG UU66 Series Installation Manual

Hide thumbs Also See for UU66 Series:
Table of Contents

Advertisement

Output
• This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps. (0.01/0.03/0.05/0.1/0.2/0.5/1/1.5/2 Watts).
• The Default is 1 Watt.

Set ID Setup

Set ID Lock
• Set the 'Set ID' item in GENERAL Menu whether to activate or not.
• Set to On (Work) or Off (Do Not Work).
Set ID
• Set the 'Set ID' of TV Set with 1~99.

Power Saving

Static Saving
• It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which is increased or
decreased by 10 steps from 0 to 100. 100 makes the consuming power set to the same one from the TV. 0 reduces the consuming power to the
minimum. The default value is 100.
- The value displayed at the OSD is not changed and only the actual setting value is converted to percentage based on the static saving
value to set.
- 0 ~ 30: HIGH, 40 ~ 60 : MID, 70 ~ 90 : LOW, 100 : OFF.
Keyless Off Hours
• Automatically TV will be turned off if there is no key input for the preset time period.
• When it is set to 'Enable' , User Menu
• When it is set to 'Enable' , User Menu

HCEC Setup

CEC Mode
(Depending on model)
• You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC].
• If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU.
• If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document)
• If [TVLink-CEC] is selected, TV will not directly work for key input except for power key. And volume related keys will work just in case of
Follower volume control mode. (For more detailed information regarding the scenario of volume control, please refer to "TVLink-CEC protocol"
document)
IR Decoding
• When 'IR Decoding' is set to 'Enable' , the TV decodes and changes it into a CEC Message and sends it to Command via the HDMI CEC Line. The
default value is Disable.
30
Timers
Auto Power Off is disabled.
Timers
2Hour Auto Power Off is disabled.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uu76 series

Table of Contents