Limited Mode; Dtv Programme Update - LG UU66 Series Installation Manual

Limited Mode

• Configure TV function's limitation. When selected to 'On' , following sub-menus will be worked by below.
Setup Menu
• Permit to tune and manage programmes as 'On' (permitted) or 'Off' (not permitted).
Programme Change
• Decide to change channel or not by setting 'Programme Change' as 'On'(Change Possible) or 'Off'(Change Impossible) when present source is
TV.
- When 'Programme Change' is set to Off. (Change Impossible)
» Programme Key, Numeral Key, List Key, Q.View Key don't work and entering 'Channel Menu' in the Main Menu OSD is impossible.
» 'Programme' item in 'On Time' menu will be fixed.
» Entering 'Programmes' in the 'Main Menu' OSD is impossible regardless of 'Programmes' item.
- When 'Programme Change' is set to On (Change Possible), 'Programme Key' , 'Numeric Key' , 'List Key' , 'Q.View' Key, 'TV/RAD Key' does
work and entering 'Channel Menu' in the Main Menu OSD is possible.
Menu Display
• Function to decide whether work with menu (including relevant menus too) of control key (On – Enter possible) or not (Off – Enter
Impossible).
- Although select Off (Enter impossible), the action that press a Menu button for 5 seconds to enter 'Installation Menu' is available.
- When select On (Enter possible), Menu works.
OSD Display
• Decide to display OSD or not by setting 'OSD Display' as On (Display) or Off (Do not Display).
- When 'OSD Display' is set to 'Off'(Do not Display), all OSD is not displayed except some exception.
- Although select 'Off' (Do not Display), the action that press a Menu button for 5 seconds to enter 'Installation Menu' and entering service
menu are available. (In-Start, Power-Only, Adjust, Installation Menu...)
System Provider Mode
• 'System Provider Mode' allows access to the menu system from the front panel or remote control but access is controlled as follows:
- When value is 'On' , Accessible Items on the menu system, others are not permissible. (Depending on model)
» Input select screens
» Sleep timer
» Aspect Ratio
» Subtitles
» Programmes (Except for Programme Tuning & Settings and Programme Manager)
» 'Safety' / 'Photo & Video' / 'Music' / 'Network' / 'Bluetooth' Menu
» Input Manager
- If the channel map is empty, 'Auto-tuning' guide dialog should be blocked by pressing 'List' , 'CH+' , 'CH-' keys.

DTV Programme Update

• It is a mode to set whether to update dtv Programme automatically or not.
• When DTV Programme Update is set to 'Auto' , the function to update TV's programme map according to dtv programme's stream information.
• DTV Programme Update is set to 'Manual' , the function to keep TV's programme map even though dtv programme's information is changed.
20