LG UU66 Series Installation Manual
Hide thumbs
Also See for UU66 Series:
- Manual (72 pages) ,
- Installation manual (63 pages) ,
- Owner's manual (39 pages)
Related Manuals for LG UU66 Series
Summary of Contents for LG UU66 Series
- Page 1 INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. UU66* UU76* www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Installation Menu Settings Media Share - SmartShare Installation Menu - Screen Share Introduction - Media Renderer - DIAL LG Hotel Mode - TV Name - Hotel Mode Operation - SoftAP - Power On Status - Beacon - Volume - Key Management... -
Page 3: Location And Function Of Controls
Location and Function of Controls Parts and Button Basic functions Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold All running apps will close. You can access and adjust the menu by pressing the button when TV is on. You can use the function when you access menu control. -
Page 4: Led Clock Connection
LED Clock Connection (Depending on model) This TV can be connected to a LED Clock via the CLOCK port. CLOCK LED Clock (*Not Provided) -
Page 5: First Use Wizard
First Use Wizard * Image shown may differ from your TV. • There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by START button. -
Page 6: Basic Settings
Basic Settings This menu is for basic settings related to language, network, portal and channel tuning without SI (Pro:Centric) setting. There are three steps for it. Language & Location • Select the Language and Country. Some countries need to select the Time Zone. Network Settings •... -
Page 7: Portal Settings
• You can select ‘On’ or ‘Off’ . If you select ‘On’ , Portal (Home Launcher) will be execute automatically after TV on. Voice Service Coverage (Depending on model) • Set the voice service coverage. You can set LG Service Country, Voice Recognition Language, and Service Area Postcode for voice service. -
Page 8: Data Cloning
Data Cloning Access Data cloning menu of TV Manger application for applying cloning file. Solution Settings The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local” via IP on server search page. If TV doesn’t contact the Server, TV will search the pre-defined channel earlier than all channels. -
Page 9: Automatically For Setup
Automatically for Setup (Depending on model) From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV. Also, you can configure the network environment. - Page 10 • If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Setting” on page 22)
- Page 11 This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, select the NEXT.
- Page 12 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 13: Manually For Setup
Manually for Setup (Depending on model) Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To continue, move and select NEXT. Please select the MANUAL PRO:CENTRIC. - Page 14 Configure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
- Page 15 Downloading the Pro:Centric application files takes few minutes.
-
Page 16: Installation Menu Settings
After the installation is completed, the following screen will be displayed. Installation Menu Settings Access Installation menu for commercial feature settings. -
Page 17: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 18: Lg Hotel Mode
LG Hotel Mode When ‘Hotel Mode Operation’ is set to On (Work), all functions of Hotel Mode apply. Hotel Mode Operation • Decide to work all functions of ‘Hotel Mode Operation’ or not by setting ‘Hotel Mode Operation’ as On (Work) or Off (Do Not Work). -
Page 19: Volume
IR Operation • Decide whether work the LG remote control or not. - When ‘IR Operation’ is set to 'Normal' , all remote keys are available. - 'Use PWR Only' makes block all remote keys except power key. -
Page 20: Limited Mode
Limited Mode • Configure TV function’s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu • Permit to tune and manage programmes as 'On' (permitted) or 'Off' (not permitted). Programme Change • Decide to change channel or not by setting ‘Programme Change' as ‘On’(Change Possible) or ‘Off’(Change Impossible) when present source is - When ‘Programme Change' is set to Off. -
Page 21: Power On Default
Power On Default • Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by status. • Set to On (Work) or Off (Do Not Work). • When ‘Power On Default’ is set to Off, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio menu. •... -
Page 22: Network
After connects Wi-Fi, you can set the IP address, subnet mask, gateway and DNS server. LG Connect (Depending on model) • Sets the LG Connect function to on or off. - You can connect TV via LG TV Plus app in smart device. - Default setting is on. -
Page 23: Ip Stream Control
IP Stream Control (Depending on model) Audio PTS Offset • Controlling output stream timing of audio. • You can set the '-500~500' . (Change step is -10 or +10) Video PTS Offset • Controlling output stream timing of video. • You can set the '-500~500' . (Change step is -10 or +10) IGMP •... -
Page 24: Pro:centric
Pro:Centric (Depending on model) Mode • Sets whether or not enable Pro:Centric and the service method . • You can set to Off, Configuration Only, Flash(Except for Iran), GEM or HTML. The default value is Off; when it is set to Off, all the sub items are disabled. -
Page 25: Receive Data
• P:C IP Setting - Server Address is set to IP Address. - Can select IPv4 or IPv6 type using 'IP Type' . (Depending on model) (IP Address) Set IPv4 or IPv6 address. (Port Number) Sets the actual port or number where the Pro:Centric server is running. - Server Address is set to Domain Name. -
Page 26: General
General Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU • It is a mode to set Number of RCU. •... - Page 27 » Type of Connector: D-Sub 9-Pin Male Male connector on box, viewed towards connector. Signal Signal requirements RX RS232 Standard RS232 specification TX RS232 Standard RS232 specification IR from TV Power ground 6, 8 Not connected +5 V DC 10 %, max 100 mV ripple 1.5 A +12 V DC 10 %, max 100 mV ripple One Channel Map...
- Page 28 Radio Name Display • Instead of “Audio Only”, the name of a radio channel is displayed on the screen when a radio broadcast is playing. • Set to On (Work) or Off (Do Not Work). • If the setting is “On”, the name of a radio channel is displayed for the radio channel. •...
-
Page 29: External Speaker
InStant On (Depending on model) • Set to ‘Instant On Mute Mode’ or ‘Instant On Reboot mode’ to enable the Instant ON feature. The Instant ON feature allows the TV to turn ON when AC power is applied, but with video and audio muted (Muted ON). The TV retains its ON status while appearing to be OFF. Pressing the POWER button toggles Off/On the video and audio mutes, so that the TV appears to turn ON instantly. -
Page 30: Set Id Setup
• You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. • If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. • If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document) •... -
Page 31: Clock Setup
Device ID • Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose ‘All’ and from ‘0 x 01’ to ‘0 x 0E’(All, 0 x 01 ~ 0 x 0e). • The default value is ‘All’ . StandBy •... -
Page 32: Password Change
- Input (Depending on model) » You can select 'Input' according to 'Clock Source' . » You can select 'RF' or 'IP' when Clock Source is 'Pro:Centric' . » You can select TV source when Clock Source is 'TV' . »... -
Page 33: Developer Mode
• If Welcome Video is enabled and a video is downloaded on the TV, the video plays. • The time it takes a video to be displayed may differ depending on the decoding time of the video. • Controls for playing the video are not available. (Pause, stop, fast forward, etc.) •... -
Page 34: Hotel Directory
Shortcut URL • Sets URL to connect when excute Shortcut app. Shorcut Icon • You can select default icon, fav icons, downloaded icon or Download(Go to TV Manager). • You can download the shortcut icon at TV Manager app. Tile Color (Color Code) •... -
Page 35: Media Share
Media Share (Depending on model) SmartShare • Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share app. Screen Share • Screen Share enables WiFi p2p functions such as Miracast and WiDi. If this value is enabled, Screen Share app is displayed at launcher bar and TV can display the screen of mobile phone by Miracast or laptop by WiDi. -
Page 36: Beacon
Security Key • If you want to change default password, you need to change ‘Use Default’ value into ‘Disable’ . Wi-Fi Signal Strength • You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select ‘Not Used’ , wireless signal strength will be set to Max value. -
Page 37: Tv Manager
• The button used to confirm and apply the settings that you have entered. • Some models do not support background screening services in iOS. • A reboot is recommended for the settings to be applied properly. • The UUID value is hexadecimal and the exact number of digits must be entered. •... - Page 38 • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Image, Icon, Micom. - Images,Icon and Software Update files should be copied into the folder named LG_DTV on the USB. »...
- Page 39 • “Import Clone File” needs *.TLL file which is generated by “Export Clone File” process. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different. Import Clone File...
- Page 40 • Once the internal TV data and its channel map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card. The user should not turn TV off nor unplug the USB memory card while processing.
- Page 41 Image Download • If there are more than two USB Memory Device, It is possible to select the USB. • The download sequence is Image Download Select Image(s) Download. • The target file is located in LG_DTV folders. - Boot Logo Image »...
- Page 42 Icon Download • Images should be copied to LG_DTV of the USB. • The download sequence is Icon Downalod Select Images DOWNLOAD. • Icon Image can download only one file. • Icon update function supports only JPG, JPEG, PNG format file. •...
- Page 43 Software Update ► Update TV Software • This feature updates TV software through the EPK file in USB. • The target file is located in LG_DTV folder. • The download sequence is Software Update Update TV Software Select file(EPK) UPDATE. ►...
-
Page 44: Usb Download Menu
USB Download Menu USB Cloning • An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. -
Page 45: Ir Codes
IR Codes • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button (BACK) -
Page 46: External Control Device Setup
External control device Setup Phone jack Type (TV) (PC) (Depending on model) RS-232C Setup • You need to purchase the phone-jack to RS-232C cable required for RS-232C IN the connection between the PC and the TV, which is specified in the (CONTROL &... -
Page 47: Rs-232C Configurations
• Baud rate: 9,600 bps (UART) automatically by IR receiver. • Data length: 8 bits • In this case, LG does not guarantee IR working function. • Parity : None • To make sure of this matter, here are two methods as below. -
Page 48: Command Reference List
Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) Transmission Data Command1 Command2 (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power 00 to 01 [Command1] : First command to control the TV. (j, k, m or x) 02. - Page 49 1 Power (Command: k a) 4 Volume Mute (Command: k e) ►To control Power On/Off of the set. ►To control volume mute on/off. You can also adjust mute using the mute button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Off...
- Page 50 8 Colour (Command: k i) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen colour. ►To lock the front panel controls on the monitor and remote control. You can also adjust colour in the picture settings. Transmission [k][m][ ][Set ID][ ][Data][Cr] Transmission [k][i][ ][Set ID][ ][Data][Cr]...
- Page 51 15 Energy Saving (Command: j q) 17 Equalizer (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalizer. Energy Saving in picture settings. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level Function...
- Page 52 19 Programme Skip/Add (Command: m b) 22 Input select (Command: x b) (Main Picture Input) ►To set skip status for the current Programme. ►To select input source for main picture. Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip Data Structure Data 01 : Add...
- Page 53 * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...