Two Lan Connectors; Content Protection And Encryption On The Network; Os Administrator Login - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

Two LAN connectors

Basically, use the LAN 1 connector. The LAN 2 connector should not be used.
If the LAN 2 connector must be used, technical knowledge of the network settings of Vision
Exchange and Windows OS is required.
For details, consult the system administrator.
Notes
The LAN 1 and LAN 2 connectors have the same function. There is no function to restrict

external access, such as by web access, to either connector.
There is no mutual communication between LAN 1 and LAN 2 by factory default.

Do not set LAN 1 and LAN 2 to the same subnet.


Content protection and encryption on the network

The unit does not support the transmission of encrypted mirroring and streaming over an IP
network. If content protection is required, encrypt the transmission using a VPN on a wired
LAN network or encrypt the communication path using WPA2, for example, of a wireless LAN
access point. For details, consult the system administrator.

OS Administrator Login

Vision Exchange is an application that runs under Windows OS, but which also hides the
functions of Windows and other applications. To configure OS settings and perform system
service and maintenance, you can use normal Windows operations by logging in to the OS as
the OS administrator.
The procedure for logging in as the OS administrator is the same on the main unit and Pods.
1. After Vision Exchange launches, open the [Administrator Menu] from the Home screen.
2. Open the [Maintenance] screen.
3. Press the [Logoff] button on the [Logoff] page.
The Windows login screen appears.
4. Log in using the OS administrator account.
OS administrator account
On the main unit
User name: sonyips
Default password: Peq-c100
On a Pod
Depends on the installed environment.
52