Main Display, Second Display, Touch Panel - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

Usage precautions
The guaranteed time for continuous operation is 8 hours. Usage should be less than 8

hours in duration in principle.
Run "Software Update" when launching for the first time. For details, see "Software

Update" (page 56).
Always use the latest version of software.

The main unit (PEQ-C100/C130) supports the following connections, although not all of

these can be used simultaneously.
- HDMI inputs: Up to 4 (2 on the PEQ-C100)
- Mirroring: Up to 6 devices
- Pods: Up to 10 devices
- Display output: Up to 2 monitors

Main display, second display, touch panel

Two displays can be connected. The second display can display a different extended image
than the first display.
For example, different presentations can be shown on the two displays to support large-scale
lectures or meetings.
Also, a second HDMI display can be connected when a DisplayPort-to-HDMI adapter is
connected to the DISPLAY PORT connector.
Note
Daisy chain connections using the DisplayPort Multi Stream Transport (MST) function are not
supported.
Assigning the main display and second display
1. Connect two displays to the main unit.
2. Turn on the devices.
3. Open the [Display] page of the [Setting] screen.
4. Select [Extend these displays] or [Clone these displays] in [Multiple Displays].
5. Select the primary display in [Display], and set the following items.
[Resolution]
Select the resolution of the selected display.
[Location]
Select the [Left] / [Right] location of the selected display.
[Main Display]
Place a check mark here to set the selected display as the main display.
6. Select the secondary display in [Display], and set the following items in the same way as
for the primary display.
[Location] is automatically set to the opposite value of the primary display.
46