Medium-Scale 6-Pod Configuration - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

Medium-scale 6-Pod configuration

This section describes how to calculate the required network bandwidth for a medium-scale
configuration using six Pods.
In the same way as when using three Pods, determine the maximum number of simultaneous
mirroring devices connected to the main unit and Pods beforehand as described in "Maximum
number of simultaneous mirroring user devices" (page 20) in the "Active Learning" section.
Next, calculate the network bandwidth that the wireless LAN access point and layer 2 switch
must maintain.
The proposed configuration is listed below.
User devices connected to main unit and Pods

- Windows devices: 6 each (with image quality set to [High])
Pods: 6

Number of displays connected to the main unit: 2

Video conferencing: Bandwidth set to maximum value.

Streaming output: Image quality set to [High]

Margin: 30%

For details about calculation equations, see "Network bandwidth" (page 21) in the "Active
Learning" section.
Network bandwidth that the wireless LAN access point must maintain
Calculation equation
Required bandwidth (T
× Number of Pods
+ Total throughput of user devices connected to main unit
= (6 Mbps × 1 + 1 Mbps × 5) × 6
+ (6 Mbps × 2 + 1 Mbps × 4)
= 82 Mbps
Adding the margin of 30%, 82 Mbps × 1.3＝106.6 Mbps
Network bandwidth that must be maintained between each Pod and layer 2 switch
Refer to "Network bandwidth that must be maintained between each Pod and layer 2 switch"
(page 37) in the "Small-scale 3-Pod configuration" section.
) = Total throughput of user devices connected to each Pod
wlan
38
(Eqn. A)
(Eqn. A)