Summary of Contents for Black Country Customs THE 85
Page 2
WHAT IS “THE 85” The 85 is an octave pedal offering studio quality pitch tracking and sound. The 85 gives you independent control of an Octave down and an additional switchable “Interval” control, allowing for an extra octave up, 2 octaves down or a perfect 5th above your original note.
Page 3
The layout of your pedal has been ergonomically designed by players, for players, to give you control over all the features you need, quickly and effectively. The following pages will give you an insight into how the controls on the The 85 work and interact with each other.
Page 5
CONTROLS FOCUS Changes the “Focus” of the two pitch shifters. Lower settings will remove higher harmonics, this will give a more dark and subby timbre. Higher settings add more harmonics giving a fuller more synth like timbre. - OCTAVE Control for the -1 Octave down level. DIRECT Level control for the direct (uneffected) signal.
CONTROLS CONTROLS EXPRESSION PEDAL Input for an expression pedal. 10K TRS style needed. An expression pedal can be used in two different modes. Pitch Mode – The expression pedal controls the pitch of either the –OCTAVE or INTERVAL or both. Level Mode –...
CONTROLS SIGNAL INPUT Bass / Guitar / Instrument input. Optimized for bass guitar but can accept other instruments. FX OUTPUT The main FX Output (this is a mono device). DIRECT/DRY Direct Dry “Buffered” signal output with no effects / level shift. FACTORY RESET The expression edit settings are stored on the on-board memory, so once set there is no need...
SPECIFICATIONS Model : The 85 FX Type : BASS OCTAVE Input Impedance : 1MΩ Output Impedance : 100Ω Noise Level (20-20KHz Filter) : <50μV Frequency Respose Bypassed : 20-20KHz (+/- 0.5dB) Recommended Minimum Load Impedance : 10KΩ Power Supply : Regulated 9V DC PSU (Not Included), centre negative, 2.1x10mm connector type...
Page 13
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 29
Après des heures d’écoute et d’essais dédiées, chaque pédale Black Country Customs a été conçue avec les meil- leurs composants et construite pour durer toute la vie sur votre pédalier.
Page 30
FONCTIONS Chacune des pédales BBC a été conçue pour offrir les fonctions qui ont vraiment de l’importance : • Fonctionnement tamponné transparent permanent • Étage de sortie à très haut niveau fournissant une excellente interface entre la guitare basse et les autres pédales d’effets / ampli •...
Page 32
CONTRÔLES FOCUS Change le “Focus” des deux octaveurs. Un réglage faible enlève les harmoniques élevées pour donner un timbre plus grave et sombre. Un réglage élevé ajoute plus d’harmoniques don- nant un timbre plus complet comme un synthé. OCTAVE Contrôle le niveau de l’octave -1. DIRECT Contrôle le niveau du signal clair (non modifié).
CONTROLS CONTROLS PÉDALE D’EXPRESSION Entrée pour une pédale d’expression. Une fiche du style 10K TRS est nécessaire. La pédale d’expression peut être utilisée de deux façons différentes. Mode Hauteur – La pédale d’expression contrôle la hauteur de, soit l’octave inférieure, soit de l’intervalle, soit des deux.
CONTRÔLES ENTRÉE DU SIGNAL Entrée instrument Basse / Guitare. Optimisée pour les guitares basses mais pouvant accepter d’autres instruments. SORTIE AVEC EFFET Sortie principale avec effet (signal mono). SORTIE DIRECTE/CLAIRE Sortie directe tamponnée sans effet ni décalage. FACTORY RESET Les réglages d’édition d’expression sont mémorisés dans la mémoire interne et lorsqu’ils sont enregistrés, il n’est plus la peine de refaire le réglage à...
Page 39
CARACTÉRISTIQUES Modèle : La 85 Type d’effet : Octaveur pour guitare basse Impédance d’entrée : 1MΩ Impédance de sortie : 100Ω Niveau de bruit (20-20KHz Filtré) : <50μV Réponse en fréquence en bypass : 20-20KHz (+/- 0.5dB) Impédance de charge minimale recommandée : 10KΩ Alimentation : Adaptateur 9VDC (non inclus), négatif au centre, fiche 2,1 x 10mm.
Page 40
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 45
EINLEITUNG Die BASS-Pedale von Black Country Customs sind aus dem Wunsch heraus entstanden, den bestmöglichen BASS- Klang zu erzielen. Jedes Black Country Customs-Pedal ist das Ergebnis stundenlanger Tests und des Hörens. Es besteht aus Komponenten höchster Qualität und ist so konstruiert, dass es ein Leben lang auf Ihrem Board hält.
Page 46
EIGENSCHAFTEN Jedes der BCC-Pedale wurde für den Einbau entwickelt Funktionen, die wirklich wichtig sind: - • Immer transparenter, vollständig gepufferter Betrieb. • Super-High-Output-Laufwerk bietet eine hervorragende Schnittstelle zwischen Bassgitarre und Effektpedalen / Ampere. • Stark reduzierter Kabelverlust. • Gleichbleibende Lautstärke der Bassgitarre die Einstellungen.
Page 48
CONTROLS FOKUS Ändert den „Fokus“ der beiden Pitch Shifter. Niedrigere Einstellungen entfernt höhere Harmo- nische und gibt ein dunkleres und subby Timbre. Höhere Einstellungen fügen mehr Harmonische hinzu und geben mehr voll Synth wie Timbre. - OKTAVE Steuerung für den Abwärtspegel von -1 Oktave. DIREKTE Pegelregelung für das direkte (nicht betroffene) Signal.
Page 50
CONTROLS CONTROLS EXPRESSIONPEDAL Eingabe für ein Expression-Pedal. 10K TRS-Stil erforderlich. Ein Expression-Pedal kann auf zwei ver- schiedene Arten verwendet werden Modi. Pitch-Modus - Das Expression-Pedal steuert die Tonhöhe entweder des –OCTAVE oder des INTER- VALLS oder beide. Level-Modus - Das Expression-Pedal steuert die Ebene von entweder -OCTAVE oder INTERVALL oder von beiden.
Page 54
CONTROLS SIGNALEINGANG Bass / Gitarre / Instrumenteneingang. Optimiert für Bassgitarre, kann aber andere Instrumente akzeptieren. FX OUTPUT Der Haupt-FX-Ausgang (dies ist ein Mono-Gerät). DIREKT / TROCKEN Direkter trockener “gepufferter” Signalausgang mit Nr Effekte / Pegelverschiebung. WERKSEINSTELLUNGEN ZURÜCKGESETZT Die Einstellungen für die Ausdrucksbearbeitung werden auf dem gespeichert On-Board-Speicher, so dass nach dem Einstellen keine Notwendigkeit mehr besteht um sie wieder auf Power Power...
Page 55
SPECIFICATIONS Model : The 85 FX Type : BASS OCTAVE Input Impedance : 1MΩ Output Impedance : 100Ω Noise Level (20-20KHz Filter) : <50μV Frequency Respose Bypassed : 20-20KHz (+/- 0.5dB) Recommended Minimum Load Impedance : 10KΩ Power Supply : Regulated 9V DC PSU (Not Included), centre negative, 2.1x10mm connector type...
Page 56
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 61
O QUE É O “THE 85” O pedal The 85 é um pedal Oitavador de intervalo e segui- mento com qualidade de estúdio de gravação. O The 85 entrega controle independente de uma oitava abaixo e um seletor adicional de “intervalo”...
Page 62
Seu pedal foi desenhado de forma ergonómica por músi- cos, para músicos e para dar controle de todos os recursos necessários de forma rápida y efetiva. As páginas seguintes mostram o funcionamento dos con- troles do THE 85 e como trabalham em conjunto...
Page 64
CONTROLES FOCUS Altera o “Foco” dos dois Pitch Shifters. Um ajuste mais baixo remove os harmônicos agudos dando um som mais escuro e denso e ajustes mais para cima vão adicionando harmônicos agudos até soar como um sintetizador. - OITAVA Controle para o nível do ajuste -1 Oitava abaixo.
CONTROLES PEDAL DE EXPRESIÓN Entrada para conectar um pedal de expressão. Conector tipo 10K TRS necessário. Um pedal de expressão pode ser usado de duas maneiras. Modo Pitch – O pedal de expressão controla a afinação (pitch) do ajuste – OCTAVE ou INTERVAL ou ambos.
Page 70
CONTROLS ENTRADA DO SINAL Entrada para seu Bajo / Guitarra / Instrumento. Se encontra otimizada para um Baixo, mas pode aceitar outros instrumentos SALIDA FX OUTPUT A saída principal de efeito (este é um dispositivo Mono). DIRECT/SECO Saída do sinal Direto e seco “Tamponado” sem efeitos.
Page 71
ESPECIFICAÇÕES Modelo: The 85 Tipo de Efeito: OITAVADOR PARA BAIXO Impedância de entrada: 1MΩ Impedância de saída: 100Ω Nível de ruído (Filtro 20-20KHz): <50μV Resposta de Frequência em By-pass: 20-20KHz (+/- 0.5dB) Impedância de Carga Mínima Recomendada: 10KΩ Alimentação: Adaptador Regulado de 9V DC PSU (No Incluso), centro negativo, conector de 2.1x10mm.
Page 72
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 77
QUE ES EL “THE 85” El pedal The 85 es un pedal Octavador de intervalo y seguimiento con calidad de estudio de grabación. El The 85 entrega control independiente de una octava abajo y un selector adicional de “intervalo”...
Page 78
Su pedal ha sido diseñado de forma ergonómica por músi- cos, para músicos y para dar control de todos los recursos que necesites de forma rápida y efectiva. Las paginas siguientes muestran el funcionamiento de los controles del THE 85 y como trabajan en conjunto.
Page 80
CONTROLES FOCUS. Cambia el “Foco” de los dos Pitch Shifters. Un ajuste más bajo remueve los armónicos más altos, dando un sonido más obscuro y denso. Ajustes más hacia arriba adiciona más armónicos sonando como próximo a un sintetizador. OCTAVE - OCTAVA. Control para el nivel del ajuste -1 Octave abajo.
Page 82
CONTROLES Entrada para conectar un pedal de expresión. Conector tipo 10K TRS necesario. Un pedal de expresión puede ser usado de dos maneras. Modo Pitch – El pedal de expresión controla la afinación (pitch) del ajuste – OCTAVE o INTERVAL o ambos.
Page 86
CONTROLES ENTRADA DE SEÑAL Entrada para su Bajo / Guitarra / Instrumento. Se encuentra optimizada para el Bajo, pero puede aceptar otros instrumentos. SALIDA FX OUTPUT La salida principal de efecto (este es un dispositi- vo Monoaural). DIRECT/SECO Salida de la señal Directa y seca “Tamponada” sin efectos.
ESPECIFICACIONES Modelo: The 85 Tipo de Efecto: OCTAVADOR PARA BAJO Impedancia de entrada: 1MΩ Impedancia de salida: 100Ω Nivel de ruido (Filtro 20-20KHz): <50μV Respuesta de Frecuencia en Bypass: 20-20KHz (+/- 0.5dB) Impedancia de Carga Mínima Recomendada: 10KΩ Alimentación: Adaptador Regulado de 9V DC PSU (No Incluso), centro negativo, conector de 2.1x10mm.
Page 88
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 93
소개 Black Country Customs(BCC) 베이스 페달 시리즈는 최상의 베이스 톤을 만들고자 하는 마음에서 시작되 었습니다. 많은 시간의 테스팅을 거친 결과로, 각 블랙 컨트리 커스텀 페달은 최고 품질의 구성품들을 사용하여 제 작되었으며 연주자들이 페달보드에 설치하여 평생 동 안 사용할 수 있도록 설계되었습니다.
Page 94
• 작동 모드를 보여주는 3색 LED • 저음 전환 • 낮은 배터리 소모량 레이아웃 페달의 레이아웃은 플레이어가 필요한 모든 기능을 빠르고 효과적으로 제어할 수 있도록 인체공학적으 로 설계되었습니다. 다음 페이지에서는 The 85 의 컨트롤이 어떻게 작동 하고 서로 상호 작용하는지에 대해 설명합니다.
Page 96
작동법 FOCUS(초점) 두 개의 피치 시프트의 “초점”을 변경해줍니다. 설정을 낮추면 고음역대의 하모닉이 제거되고 이 설정은 음색을 어둠고 흐려지게 만들어줍니 다. 설정을 높이면 하모닉이 추기되고 이 설정 은 신스 음색을 내어줍니다. OCTAVE(옥타브) 1 옥타브 아래의 레벨을 설정해줍니다. DIRECT(다이렉트 인풋) 다이렉트 인풋의 양을 조절해줍니다. INTERVAL SWITCH(음정...
Page 98
CONTROLS CONTROLS EXPRESSION PEDAL(익스프레션 페달) 익스프레션 페달을 위한 인풋. 10K TRS 스타 일 필요 익스프레션 페달은 두 가지의 다른 모드로 사 용 가능합니다. Pitch Mode – 익스프레션 페달이 옥타브 아 래, 음정, 또는 두 가지의 피치를 조절합니다. Level Mode – 익스프레션 페달이 옥타브 아 래, 음정, 또는...
Page 102
CONTROLS SIGNAL INPUT(인풋) 베이스기타 / 일렉기타 / 악기 인풋 베이스에 특화된 페달이지만 다른 악기에도 사 용 가능합니다. FX OUTPUT (FX 아웃풋) 주 FX 아웃풋 (이 기기는 모노 기기입니다. DIRECT/DRY(다이렉트/드라이) 효과, 레벨 변경 없는 다이렉트 인풋 신호 인풋 익스프레션 페달의 편집 설정은 온보드 메모리 에...
Page 103
사양설명서 Model : The 85 FX Type : BASS OCTAVE Input Impedance : 1MΩ Output Impedance : 100Ω Noise Level (20-20KHz Filter) : <50μV Frequency Response Bypassed : 20-20KHz (+/- 0.5dB) Recommended Minimum Load Impedance : 10KΩ Power Supply : Regulated 9V DC PSU (Not Included), centre negative, 2.1x10mm connector type...
Page 104
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Page 130
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, that may cause undesired operation. Warning: Changes or modification to the equipment not approved by Laney can void the user’s authority to use the equipment.
Need help?
Do you have a question about the THE 85 and is the answer not in the manual?
Questions and answers