Advertisement
5. Position the main stand on the floor in the desired position.
Leave a working area of at least 914 mm on all sides. Mark the
drill holes through the base holes and drill four 12.7 mm dia-
meter holes.
6. Insert 76.2 mm (3") concrete anchors into the holes and
tighten the anchor nuts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61909
Page 5
02
2021-1
Advertisement
