CONTROLE Waarschuwing voor een vereiste controle. INFORMATIE Verwijzing naar aparte documenten waarop gelet moet worden. Oproep tot actie − Lijst, opsomming Ô Verwijzing naar andere plaatsen in dit document 2 – AS 210 B deurbesturing / Rev.A 2.0...
Juist gebruik − Afstandsbedieningen buiten het bereik van kinderen De AS 210 B deurbesturing is uitsluitend bestemd voor de houden. besturing van deurinstallaties. De besturing mag alleen in droge ruimtes worden gebruikt. Keuringsprincipes en voorschriften...
− EN 61000-3-3 (Limietwaarden voor spanningswisselingen, spanningsschommelingen en flikkering in openbare laag- De AS 210 B is uit te breiden met de ZM SKS B steekmodule. spanningsnetten) Met behulp van de steekmodule kan een onderlijst worden − EN 61000-6-2 (Elektromagnetische compatibiliteit (EMV) - aangesloten.
Thermische beveiliging motor Schakelaar OPEN Schakelaar DICHT Motor (400 V / 50 Hz / 3-fasen) Veiligheidseindschakelaar OPEN (opener) Veiligheidseindschakelaar DICHT (opener) Veiligheidseindschakelaar noodhandbediening (opener) Transformator Klemmenstrip netaansluiting Klemmenstrip motor Klemmenstrip netspanningsselectie AS 210 B deurbesturing / Rev.A 2.0 – 5...
Page 6
Klemmenstrip motor Klemmenstrip motor Klemmenstrip netspanningsselectie Klemmenstrip netspanningsselectie Aansluiting: Besturing op het elektriciteitsnet aansluiten. Besturing op de motor aansluiten. Kabelbundels moet direct voor de betreffende klem met een kabelbinder worden vastgezet. 6 – AS 210 B deurbesturing / Rev.A 2.0...
Page 7
Eindschakelaar OPEN Eindschakelaar DICHT Vooreindschakelaar DICHT (Na activering wordt de deur niet omgekeerd) Thermische beveiliging motor Noodbediening (opener) Veiligheidseindschakelaar DICHT Veiligheidseindschakelaar OPEN Alleen in combinatie met ZM SKS B steekkaart AS 210 B deurbesturing / Rev.A 2.0 – 7...
Page 8
- Een weerstand van 8,2 kOhm moet met de DW- (drukgolf) schakelaar in serie worden geschakeld. - De dipschakelaar 1 moet op ON staan. - De dipschakelaar 2 moet op ON staan. groen bruin 8 – AS 210 B deurbesturing / Rev.A 2.0...
Page 9
/ geel wit (-) (STOP) groen (Sig) bruin (+12V) X7 - Opsteeksokkel voor ZM SKS B printplaat - wordt de opsteeksokkel niet gebruikt, dan moet jumper 5 erop worden gestoken. AS 210 B deurbesturing / Rev.A 2.0 – 9...
Luchtvochtigheid: tot 80% niet condenserend Gewicht: ca. 1,8 kg Richtlijnen: Normen * Alleen in combinatie met de ZM SKS B uitbreidingskaart erop gestoken – zelfhoudend contact niet erop gestoken = dodeman 10 – AS 210 B deurbesturing / Rev.A 2.0...
Elektromagnetische compatibiliteit (EMV) - Deel 6-3: Algemene normen – Emissienormen voor huishoudelijke, handels- en lichtindustriële omgevingen DIN EN 60335-1 Huishoudelijke en soortgelijke elektrische toestellen - Veiligheid - Deel 1: Algemene eisen AS 210 B deurbesturing / Rev.A 2.0 – 11...
CHECK Indicates a check to be performed. REFERENCE Reference to separate documents which must be complied with. Action request − List, itemisation Ô Reference to other sections of this document 2 – Door Control AS 210 B / Rev.A 2.0...
Page 15
− EN 12453 (Safety in use of power operated doors - Using the equipment for its intended purpose Requirements) The AS 210 B controls are intended exclusively for controlling − EN 12978 (Safety devices for power operated doors and door systems.
Functions Low voltage − EN 60335-1 (Household and similar electrical appliances - Safety) The basic model of the AS 210 B controls is designed only for − EN 60335-2-103 (Particular requirements for drives for deadman operation. gates, doors and windows)
Page 17
Safety limit switch CLOSE (normally closed contact) Safety switch, emergency manual operation (normally closed contact) Transformer Terminal block for mains connection Terminal block for motor Terminal block for mains voltage selection Door Control AS 210 B / Rev.A 2.0 – 5...
Terminal block for mains voltage selection Connection: Connect the controls to the mains power supply. Connect the controls to the motor. Cable groups must be fixed close to their relevant terminals using a cable tie. 6 – Door Control AS 210 B / Rev.A 2.0...
Page 19
Thermal overload protection for motor Emergency operation (normally closed contact) Safety limit switch CLOSE Safety limit switch OPEN Only in connection with an ZM SKS B plug-in circuit card Door Control AS 210 B / Rev.A 2.0 – 7...
Page 20
- An 8.2 kOhm resistance must be connected in series with the pressure switch. - DIP switch 1 must be set to the ON position. - DIP switch 2 must be set to the ON position. white green brown 8 – Door Control AS 210 B / Rev.A 2.0...
Page 21
(-) (STOP) green (Sig) brown (+12V) X7 - Plug-in base for ZM SKS B circuit card - if the plug-in connection is not used, jumper 5 must be inserted. Door Control AS 210 B / Rev.A 2.0 – 9...
80% not condensing Weight: approx. 1.8 kg Guidelines: Standards * Only in connection with the ZM-SKS B add-on circuit card jumper inserted = press-and-release jumper not inserted = deadman 10 – Door Control AS 210 B / Rev.A 2.0...
Household and similar electrical appliances - Safety - Part 1: general requirements DIN EN 60335-2-103 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows Door Control AS 210 B / Rev.A 2.0 – 11...
Need help?
Do you have a question about the AS 210 B and is the answer not in the manual?
Questions and answers