Table of Contents
Advertisement
NEW USER PASSWORD
A new USER PASSWORD may be entered in two ways:
a) Enter the old PASSWORD, press [OK]. If you return to the PASSWORD
screen before a sleep timeout, the [n] key will now be active. Pressing
the [n] key will show "NewUP". A New USER PASSWORD entry will
always be displayed in red to distinguish it from the normal password
entry mode. Enter a new 5 digit User PASSWORD and press OK.
Remember your New USER PASSWORD or document it somewhere
for future reference.
b) If the user forgets their password, setting DIPSW 3 ON will allow the
user to enter a new password. This procedure will involve the temporary
removal of the Main PWS from the wall, please see page 13. This must
be done carefully with the power remaining ON.
When DIPSW 3 is on, 4 Red bars are shown on the password screen and the
[n] key is now active.
Enter a new 5 digit User PASSWORD and press OK. Remember your New
User Password or document it somewhere for future reference. Switch
DIPSW 3 back to the OFF position and re-install the PWS Main Station back
into the wall. A USER may only reset the USER PASSWORD.
18
PWS Rear Panel View
WWW.JOHNSONSYSTEMS.COM
Advertisement
Table of Contents
