Table of Contents
Advertisement
iNSTaLLaTiON
connecting the speakers
Connect the enclosed speaker cables according to the figure below. One end to the speakers and the other
ends to the amplifier, following the directions – 4 below. Make sure to connect + to + and – to - . The enclosed
speaker wires are meter long. The speaker wires can be replaced with other brands and lengths.
)Remove the sheath from
the end of the wire
Right speaker
�
connecting the subwoofer (extra accessory)
An active subwoofer will substantially improve the bass reproduction. Connect a line cable between the SW OUT
and LINE IN input on the subwoofer. Generally, a line cable is delivered with a subwoofer.
0
) Open the speaker
terminal
�
Amplifier's rear panel
) Insert the wire into the
speaker terminal
�
�
�
�
4) Tighten
Left speaker
�
�
Advertisement
Table of Contents
Need help?
Do you have a question about the STEREO TWO and is the answer not in the manual?
Questions and answers