Table of Contents
Advertisement
2.5.4
APM Configuration
APM Configuration
Restore on AC Power Loss
Power On By PCI Device
Power On By Ring
Power On By PS/2 KB/MS
Power On By RTC Alarm
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss.
Configuration options: [Power On] [Power Off]
Power On By PCI Device [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through
a PCI/PCIE/Onboard LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By Ring [Disabled]
Allows you to enable or disable RI to generate a wake event. Configuration
options: [Disabled] [Enabled]
Power On By PS/2 KB/MS [Disabled]
Allows you to enable or disable PS/2 Keyboard/Mouse to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
2-34
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Options
Power On
Power Off
Chapter 2: BIOS setup
Advertisement
Table of Contents
