Step 6: Create The Data Partition - Hitachi HCP Anywhere Edge On-Site Setup And Recovery

Step 6: Create the data partition

After you install the Windows Server software, you need to configure a data
partition on the HCP Anywhere edge appliance. The data partition will be
used to store any data that is added to the HCP Anywhere edge appliance.
To create the data partition:
1. If you are not already done so, log in to the HCP Anywhere edge
appliance.
2. In the bottom left corner of the screen, click the search bar icon (
3. In the search bar, type: Create and format hard disk partition . In the search
results, double-click Create and format hard disk partition .
HCP Anywhere Edge Appliance On-Site Setup and Recovery
Chapter 4: Recovering the HCP Anywhere edge appliance
Option 2: Reinstall the operating system
).
51