Hitachi HCP Anywhere Edge On-Site Setup And Recovery page 29

To register an edge device:
1. On the desktop, click the Registration — HCP Anywhere Edge desktop
shortcut.
2. On the Registration Type page of the Registration wizard:
a. In the dropdown, make sure New is selected. New is selected by
default.
b. Click Next .
3. On the Server Information page:
a. Enter the fully-qualified domain name of your HCP Anywhere
system. You can't register an edge device using the IP address of
your HCP Anywhere system.
b. Optionally, if the HCP Anywhere edge appliance accesses the internet
using a proxy, do these:
a. Click Advanced .
b. In the Proxy Server field, enter the IP address or DNS name of the
proxy server.
c. In the Proxy Port field, enter the port of the proxy server.
c. Click Next .
4. If a certificate prompt appears, click OK to accept the self-signed
certificate.
5. On the Authentication page:
a. In the Username field, enter your username.
Note: By default, Edge searches for your user in the root domain
connected to the HCP Anywhere system. If your AD user is in a
subdomain, enter
b. In the Password field, enter your password.
c. Click Next .
6. Click Finish .
Chapter 3: Configuring the HCP Anywhere edge appliance
HCP Anywhere Edge Appliance On-Site Setup and Recovery
@
<username> <subdomain>
Step 6: Register the edge device
into the field.
Username
29