Nokia NSW-5 Series Service Manual page 125

PAMS Technical Documentation
Comp/exp group
Audio mode group
ST group
SAT group
Audio path group
Data Flow Type drop list (gray text = feature not active)
TX Power Level drop list
Channel edit box
Slot edit box (gray text = feature not active)
DVCC edit box (gray text = feature not active)
Volume drop list
Apply init button (ALT+A):
Close button (ESC)
Issue 1 10/00
On radio button
Off radio button
HF radio button
HP radio button
On radio button
Set signalling tone on in analog mode only
Off radio button
Set signalling tone off in analog mode only
On radio button
Set Supervisory Audio Tone on in analog mode only
Off radio button
Set Supervisory Audio Tone off in analog mode only
On radio button
Off radio button
This list changes the transmission data type. List consists fol-
lowing transmissions:
* TDMA mode zero data transmission
* TDMA mode random
* Continuous digital 11
With this value is possible to change the transmission power.
The user can give the needed D–AMPS power value (2..10).
User can enter here channel number that is used for both
transmission and receiving. The frequency of the selected
channel is shown after selection.
Value of used time slot in digital mode only
Value of Digital verification color code in digital mode only
Value of audio volume can be selected
Accepts INIT group values and validates them. After validation
application sends corresponding messages to ME.
Close dialog
E Nokia Mobile Phones Ltd.
Service Software Instructions
Set compander on
Set expander on
Set audio handsfree mode
Set audio hand portable mode
Set external audio path on
Set external audio path off
NSW-5
Page 43