Tx Power - Nokia NSW-5 Series Service Manual

PAMS Technical Documentation
Tx Power... command
Activation
Alt, T, X, H or L
Starts TX power tuning.
The user is first requested to select which data transmission type is used
in Set data transmission dialog.
OK =
Cancel= TDMA mode random modulation
The user is then requested to select the values with which the tuning is
started in Start Tuning dialog.
Start Tuning dialog includes the following items:
Current Values in PC memory
Phone EEPROM Values
The next automatic selections are made when this tuning function is acti-
vated:
Issue 1 10/00
Status Bar Text
Open TX Power Tuning dialog box
TDMA mode zero modulation
Tuning values are load from program's internal memory.
Tuning values are load from ME's EEPROM.
– Active Unit = TX
– Operation Mode = Continuous digital
– Selected band
– Channel 190 (low ) or 500 (high)
– Power level 6
E Nokia Mobile Phones Ltd.
Service Software Instructions
Page 29
NSW-5