Warranty card ....................................17 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the VCUN unit and all its modifications.
SAFETY REQUIREMENTS • Please read the user’s manual carefully prior to installing and operating the unit. • All user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical, and technical norms and standards must be observed when installing and operating the unit.
VCUN • In case of continuous operation of the unit, periodically check the security of mounting. • Do not sit on the unit and avoid placing foreign objects on it. • Use the unit only for its intended purpose. THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.
Casing design R – right-hand L – left-hand Phases _ – universal E – single phase D – three-phase Pole number Motor power [kW] Impeller width [mm] Impeller diameter [mm] Unit designation VCUN – centrifugal fan with an external motor www.ventilation-system.com...
The unit is rated as a Class I electrical appliance. Hazardous parts access and water ingress protection rating: • for VCUN fans – IP55. NEVER TEST RUN OR OPERATE THE FAN, WHICH IS NOT CONNECTED TO THE VENTILATION SYSTEM, IF THE AIR FLOW RATE AND THE CURRENT CONSUMPTION...
Page 7
Overall dimensions and position options of the VCUN fan casing В POSSIBLE VARIANTS OF THE VCUN FAN CASING POSITIONS (View on the supply side) Impeller rotation Impeller rotation leftwards rightwards Dimensions [mm] Weight Fan model [kg] a1 a2 b1 b2 d1 d2 VCUN 120х62-0,25-2D...
A bracket for mounting the fan is attached to the bottom of the electric motor. VCUN fans are available in right-hand and left-hand versions. In the first case, the impeller rotates clockwise and in the second case, the impeller rotates counterclockwise, air intake side view.
• Connect the air ducts to the fan. • On the air supply side, use a FVC-VCU, FVC-VCUN flange (optional) (Fig. 5) or install a RVC VCU, RVC-VCUN protective grille (Fig. 6). After installing the unit make sure that the fan impeller rotates freely.
ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED AND WILL VOID THE WARRANTY. The VCUN fan is designed for connection to power mains with the parameters specified in the «Technical data» section. The connection must be made using durable, insulated and heat-resistant conductors.
• Cut off power supply to the fan. • Provide access to the impeller blades. • For the VCUN fan – unscrew the screws and remove the ring. • Clean the impeller blades with a dry soft brush or compressed air.
TROUBLESHOOTING Problem Possible reasons Troubleshooting Make sure that the unit is properly No power supply. connected to the power mains and make any corrections, if necessary. The fan does not start. Turn off the fan. Jammed motor. Troubleshoot the motor jamming. Restart the fan.
VCUN MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC.
This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are acknowledged and accepted. Customer’s Signature Seller’s Stamp INSTALLATION CERTIFICATE The VCUN ___________________ unit is installed pursuant to the requirements stated in the present user's manual. Company name Address Phone Number Installation Technician’s Full Name...