Table of Contents
Advertisement
09
INSTALLATION - FIXING TO WALL
If installing on a wall, drill two 8mm diametre holes on the wall.
The hole centres should be 66mm apart and level.
Use the approriate wall plugs for the wall surface. Mount the bracket to the wall
with suitable screws.
Alternatively, if the wall is not strong enough to support the unit, use a wooden
batton to support the bracket and fix the batton to the wall at a suitable point.
Ensure the position of the bracket leaves enough clearance to mount the unit
and connect the pipework.
Note
Ensure that the appliance is freely accessible for maintenance work.
Advertisement
Table of Contents
