Advertisement
Quick Start Guide
Refer to Owner's Manual for Safety Statements. Complete Owner's Manual available online.
DO NOT power spray
DO NOT power spray
User Option Mode
There are several options you can change to customize the operation of the oven for
your business. The table below shows these options;
the factory setting is shown in bold type.
1.
Open oven door and press Number Key "2" for 5 seconds.
2.
Press any Number Key to enter related options as noted in chart below.
3.
To change, repeat pressing the Number Key until desired setting is reached.
4.
Press START key
5.
To exit User Option Mode, press STOP/RESET key
NUMBER KEY
DISPLAY
1
OP:10
End of Cycle Beep
OP:11
OP:12
2
OP:20
Key Beep Volume
OP:21
OP:22
OP:23
3
OP:30
Key Beep
OP:31
4
OP:40
Active Display
OP:41
OP:42
OP:43
5
OP:50
On-the-Fly Cooking
OP:51
6
OP:60
Reset Door Open
OP:61
7
OP:70
Maximum Heating
OP:71
Time
8
OP:80
Manual Operation
OP:81
9
OP:90
Double Digit
OP:91
Operation
*Note: Factory setting may vary by model
©2019 ACP, Inc.
Cedar Rapids, IA 52404
No metal pans
to save the selected setting.
OPTIONS ( FACTORY SETTINGS IN BOLD )
3 second beep
Continuous beep until door is opened
5 beep bursts until door is opened
Eliminates beep
Sets volume to low
Sets volume to medium
Sets volume to high
Prevents beep when pad is pressed
Allows beep when pad is pressed
15 seconds after oven door is opened, keyboard disabled
30 seconds after oven door is opened, keyboard disabled
1 minute after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
Prevents different pre-programmed pads to be activated during cooking
Allows different pre-programmed pads to be activated during cooking
Allows oven to resume heating time countdown after door is opened during cycle
Cancels heating time count down after door is opened during cycle.
Allows 30 minutes of heating time
Allows 10 minutes of heating time
Allows use of preprogrammed pads only
Allows use of manual time entry and preprogrammed pads
Allows 10 (0-9) preprogrammed pads
Allows 20 (00-99) preprogrammed pads
For full product documentation visit:
No metal pans
and close door.
www.acpsolutions.com
Refer to Owner's Manual for complete care
and cleaning instructions.
⚠
Do NOT use abrasive cleaners or cleaners
containing ammonia, citrus, phosphates, chlorine,
sodium or potassium hydroxide (lye).
Use of unapproved cleaning agents will void
the terms of the warranty.
Part No. 20267702
Original Instructions
Advertisement
