Back Bolt; Adjusting The Armrest Height; Adjusting The Armrest Width; Fold-Down Armrest - VELA Medical X-Ray Chair Instructions For Use Manual

1 2

2.0.8. BACK BOLT*

The backrest can be set to a specific angle by adjusting and
attaching the bolt mounted on the back of the backrest.

2.0.9. ADJUSTING THE ARMREST HEIGHT

Adjusted by loosening the screw on the armrest bar and
adjusting the height of the armrest. Remember to tighten the
screw when done.

2.0.10. ADJUSTING THE ARMREST WIDTH

Adjusted by loosening the screw under the seat on the seat
support and adjusting the armrest width by pulling out the
armrest. Remember to tighten the screw when done.

2.0.11. FOLD-DOWN ARMREST

To fold down the armrest, press the button on the side of the
armrest and push the armrest backwards and down.
Note: The armrest is only locked when it is in an upright
position. The armrest can only be folded down if the width
adjustment of the armrest allows it.