Setting Angle Of Seat; Setting Angle Of Backrest; Adjusting Lumbar Support; Setting The Back Height - VELA Medical X-Ray Chair Instructions For Use Manual

2.0.4. SETTING ANGLE OF SEAT*

Adjusted by pulling up the middle handle on the right-hand
side.

2.0.5. SETTING ANGLE OF BACKREST

Adjusted by pulling up the rear handle on the right-hand side.

2.0.6. ADJUSTING LUMBAR SUPPORT*

ALB
The backrest can be adjusted to provide optimal lumbar
BACK
support by pulling up the handle on the right-hand side of
the backrest. The backrest adjusts to fit and support the lower
back. Release the handle, and the backrest remains in the
desired lumbar angle.

2.0.7. SETTING THE BACK HEIGHT

Release the handle located on the back. Adjust the back.
Remember to tighten the handle afterwards.
*
Depending on model
1 1