Advertisement
TECHNICAL DATA
Rated voltage
Rated speed
Thickness of grinding wheel
Grinding wheel diameter
Thread of work spindle
Accessory type
Grinding wheel
Cutting wheel
Wire brush
Weight - not including battery pack
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value
Surface grinding (Li-Ion 1 x 1,5Ah...2 x 9,0Ah): Vibration emission value
Uncertainty K
Disk sanding (Li-Ion 1 x 1,5Ah...2 x 9,0Ah): Vibration emission value
Uncertainty K
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R-X4
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
Use AEG 18V battery and charger only
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and instructions
CORDLESS ANGLE GRINDER
for future reference.
Compatible charger
(not included)
Safety Warnings Common for Grinding, Wire Brushing or
Abrasive Cutting-Off Operations:
a. This power tool is intended to function as a grinder, wire
AL18G
AL1218G
BL1218
BLK1218
b. Operations such as sanding or polishing are not
BL18DP-X5
BL18DP2-X5
BL18DPS
c. Do not use accessories which are not specifically designed
d. The rated speed of the accessory must be at least equal to
21
ANGLE GRINDER SAFETY WARNINGS
brush or cut-off tool. Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
recommended to be performed with this power tool.
Operations for which the power tool was not designed may create
a hazard and cause personal injury.
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
the maximum speed marked on the power tool. Accessories
running faster than their rated speed can break and fly apart.
BEWS18BLX180
18V
6900 min
-1
6 mm
180 mm
M 14
Type 27
Type 41 (Flat disc)
Type 6
4.6 kg
L
= 86 dB(A)
p
3 dB(A)
L
= 97 dB(A)
W
3 dB(A)
a
= 7.0 m/s
2
h,AG
1.5 m/s
2
a
≤ 2.5 m/s
2
h,DS
1.5 m/s
2
21
Advertisement
