Unpacking The Pump Unit's Kit Container - DARLEY 2BE6.5H Operator's Manual

Unpacking The Pump Unit
& Accessories From
The Kit Container
1. Remove the kit container locking ring and cover.
2. Remove the flashlight, and laminated instruction card from the kit container.
3. Open the outer plastic bag.
4. Grab the suction hose by the coupling, and pull it out until all that is left in the kit container is that which was
inserted under the engine's exhaust.
5. Lift the pump unit out of the kit container. This will bring the remainder of the suction hose out of the kit container.
6. Open the inner plastic bag.
7. Remove the discharge hose from the plastic bag.
Prepared by: TED Rev. #: 13
Approved by: MCR 15May2006
13
© W.S. Darley & Co. 1200569.doc