Advertisement
fig.2
4.2.
Pull out the drawer until the plastic latches are exposed.
4.3.
Press the plastic latches of both sides at the same time
(fig.2), pull out the drawer.
4.4.
Screw in the four adjustable feet F to the legs C (fig.3).
4.5.
Attach legs to main draw body (fig.4). Fix in position using
screws provided.
4.6.
Attach lower shelf D and shelf supports E as shown (fig.5)
using screws provided.
4.7.
Position and attach desk top B (fig.5) using screws provided.
4.8.
Position and attach desk hood A (fig.5) using screws
provided.
4.9.
Push Drawer B1 back into Desk top assembly B2 (fig.6).
Press the plastic latches as per instruction 4.3. to complete
assembly.
4.10.
Adjust feet to level workstation.
fig.5
5. MAINTENANCE
5.1.
Wipe clean with a damp cloth.
DO NOT clean the locker with any solvents which may damage the surfaces or the protective coating.
8
Parts support is available for this product. Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.3
01284 703534
sales@sealey.co.uk
Original Language Version
fig.4
fig.6
AP875 | Issue 2 (H,F,3) 12/02/2019
www.sealey.co.uk
Advertisement
