Table of Contents
Advertisement
Quick Links
Specifications and
Instruction Manuals
Direct Output Vibration Pickup
VP-420 (4-20mA Velocity Type)
VP-421 (4-20mA Velocity + AC Acceleration Type)
Model:
Manufacturer:
Specification No.:
Total Page:
Revision Date:
－ 1 －
VP-420/421 Specifications Rev5.0
IMV CORPORATION
VP-420: TVE-5-5676E
VP-421: TVE-5-5677E
13
th
20
April, 2021
Advertisement
Table of Contents
Related Manuals for IMV 4P-420
Summary of Contents for IMV 4P-420
- Page 1 Specifications and Instruction Manuals Direct Output Vibration Pickup Model: VP-420 (4-20mA Velocity Type) VP-421 (4-20mA Velocity + AC Acceleration Type) Manufacturer: IMV CORPORATION Specification No.: VP-420: TVE-5-5676E VP-421: TVE-5-5677E Total Page: Revision Date: April, 2021 － 1 － VP-420/421 Specifications Rev5.0...
-
Page 2: Table Of Contents
INDEX Introduction ......................... 3 Safety Precautions ......................3 1. Outline ........................5 2. Specifications ......................6 3. Outer Dimensions ...................... 7 4. Outer Dimensions of Mounting Adapter (Quick Fit)............8 5. Frequency Response ....................8 6. Outline View of Connector Cable .................. 9 7. -
Page 3: Introduction
Introduction Thank you for purchasing Direct Output Vibration Pickup “VP-420” or “VP-421”. Read this instruction manuals carefully to ensure the best performance and longest product life of the device. In addition, pay attention to the cautions described below to use the product safety. - Page 4 ◆For Safe Use Warning (1) Do not use this product as a life-threatening alarm device. (2) When installing this product or peripheral devices in a high place, be sure to use a workbench such as a stepladder. (3) Do not use in abnormal conditions such as smoke, strange odor, or noise. Also, do not disassemble or modify this product regardless of whether it is normal or abnormal.
-
Page 5: Outline
1. Outline This product has 4-20mA DC output which is proportional to the vibration level and the capability of interfacing direct into PLC, BMS or 4-20mA input module. ◆Feature (1) Velocity measurements based on ISO10816 which defines the vibration severity is possible by this product. -
Page 6: Specifications
2. Specifications VP-420 Velocity Range (rms) □ 0 to 10mm/s □ 0 to 20mm/s □ 0 to 25mm/s □ 0 to 50mm/s □ 0 to 100mm/s (Nominal: within ±10% at 80Hz and 22°C) VP-421 Velocity Range (rms) □ 0～10mm/s 10.2mV/(m/s (Max Acc. -
Page 7: Outer Dimensions
3. Outer Dimensions (See “2. Specifications” about structure and weight. Dimension unit is “mm”.） □ Drip-Proof Direct-Connect Type White： 15 to 30VDC Black： 0V Silver φ27.5 VP-420 Cable White： 15 to 30VDC Black： 0V Red： AC W5/8 Depth 6 Silver HEX 28 Sensor Body VP-421 Cable... -
Page 8: Outer Dimensions Of Mounting Adapter (Quick Fit)
4. Outer Dimensions of Mounting Adapter (Quick Fit) □ MS-AS001 (for Glue Face) □ MS-AS002 (M8 Male) W5/8 W5/8 □ MS-AS003 (M6 Male) □ MS-AM005 (Magnet: φ25.4mm Pole Piece) W5/8 W5/8 25.5 （Unit is “mm”） 5. Frequency Response Frequency [Hz] －... -
Page 9: Outline View Of Connector Cable
6. Outline View of Connector Cable Sheath Material: Cable Outer Diameter: φ5.9 (Standard) Outline View: See below Figure Brown White MS-AC010 Silver (Shield) Straight Connector Blue (No use) Black Brown White Silver (Shield) MS-AC011 Blue (No use) Angle Connector Black φ15 Outline View of Connector Cable －... -
Page 10: Instructions
7. Instructions 7-1. Installation of Pickup Attach Quick Fit to the bottom of pickup and install it to the vibration measurement point (see Fig.7-1). Ideally, the surface of the equipment on which the pickup will be installed should be as flat as possible, and the contact surface should be coated with silicone grease or oil. -
Page 11: Wiring Method
7-3. Wiring Method 7-3-1. Wiring Method of VP-420 Connect VP-420 according to the example shown in Fig.7-2 below. White ＋ Power Supply 15 to 30DC － Silver 4-20mA Logger － Black ＋ PLC/DCS etc. Ex.1 Case of 4-20mADC Logger VP-420 ＋... -
Page 12: Wiring Method Of Vp-421
7-3-2. Wiring Method of VP-421 Connect VP-421 according to the example shown in Fig.7-3 below. ＋ White Power Supply Silver － 15 to 30ＶDC Acceleration Red or Brown Waveform 4-20mA Logger AC Output － ～ Black ＋ PLC/DCS etc. Ex.1 Case of 4-20mADC Logger VP-421 White ＋... -
Page 13: Handling Precautions
When disposing of this product, dispose of it as industrial waste. 9. Warranty If this product has the fault caused by the responsibility of IMV as the defect under production and material during warranty period, we will repair or replace free of charge.