Table of Contents
Related Manuals for IMV CardVibro Air2
Summary of Contents for IMV CardVibro Air2
- Page 1 ORTABLE IBROMETER IBRO ’ UIDE VM-2012 A VM-2012C A ONNECT Document Number : TVE-6-3852E Issued on: Sept. 11, 2017 Pages: 52 Version: 2.5.0 WiFi Portable Vibrometer VM-2012 Air2 1/52...
- Page 2 Revision History Date Details Feb 14, 2013 0.8.0 New Issue Feb 21, 2013 0.8.1 Added a clause. Feb 22, 2013 0.8.2 Added description of vibration criteria. Feb 28, 2013 1.0.0 Added options of connectors. Mar 18,2013 1.0.1 Added a status of charge completion April 17, 2013 1.6.0 Added the functions, Cursor, Top5, Dictionary...
-
Page 3: Table Of Contents
Table of Contents INTRODUCTION ..........................5 CONTENTS OF A PACKAGE ......................6 2-1. Product and Parts ........................6 2-2. Free Data ........................... 6 2-3. Optional Accessories ........................7 FRONT VIEW ..........................8 3-1. Power Button ..........................9 3-2. LED Indicator ..........................9 3-3. - Page 4 7-3. Units ............................32 7-4. Memory ........................... 33 7-5. A Filter ............................. 33 7-6. Dictionary ..........................34 7-7. Hierarchy ..........................34 7-8. Tx Settings ..........................35 7-9. User Judgment Edit ......................... 36 SPECIFICATIONS ......................... 37 8-1. Basic Specifications ......................... 37 8-2.
-
Page 5: Introduction
2. Follow the instructions printed on the battery for replacement and disposal of used batteries. Pay attention to the polarity of the battery for installation. Should you have any inquiries or find a problem during use, please consult our sales office near you or IMV quality assurance department. -
Page 6: Contents Of A Package
2. CONTENTS OF A PACKAGE 2-1. Product and Parts 1. CardVibro Air2 2. USB Battery Charger 3. USB Cable (Image: Standard Model) 4. Standard Probe 5. Ni-MH (Rechargeable) Batteries 6. Quick User’s Guide 2-2. Free Data 1. Android Application 2. User’s Manual 3. -
Page 7: Optional Accessories
2-3. Optional Accessories 1. Data Management Software 2. Equipment Diagnosis Software 3. Carrying Case 4. Magnet 5. Long Probe 6. Cable Available for the VM-2012 only. Available for the VM-2012C only. 8. Low Frequency Vibration 7. Piezoelectric Acceleration Pickup 9. Charge Amplifier Measurement Pickup Available for the VM-2012C only. -
Page 8: Front View
3. FRONT VIEW Standard Model: VM-2012 Connector Model: VM-2012C (1) Power Button (2) LED Indicator (3) USB Outlet Cover (4) Battery Cover (5) Strap Mount (6) Vibration Sensor (7) Socket (M6 size screw) (8) Sensor Connector WiFi Portable Vibrometer VM-2012 Air2 8/52... -
Page 9: Power Button
3-1. Power Button Press the power button to turn on the device. When it is on, the LED is on. Press the power button to turn off the device. When it is off, the LED is off. When the device is on, WiFi goes standby and be ready to be connected. 3-2. -
Page 10: Dimensions
4. DIMENSIONS 4-1. Standard Model WiFi Portable Vibrometer VM-2012 Air2 10/52... -
Page 11: Connector Model
4-2. Connector Model WiFi Portable Vibrometer VM-2012 Air2 11/52... -
Page 12: How To Install The Software
5. HOW TO INSTALL THE SOFTWARE Refer to the quick user’s guide for software installation. 6. OPERATING INSTRUCTIONS 6-1. Activation of the Software and Setting of the Tablet PC (Nexus 7) (1) Turn on the tablet PC and get ready to activate WiFi connection. (2) Press the power button of the Air2 to bring it to standby mode. -
Page 13: Measurement Method
(5) Select the “Air-II-xxxxxx” listed in the networks as the access point. (“xx” will be displayed arbitrary in hex notation). (6) Once the status of the “Air-II-xxxxxx” is indicated as connected, the connection is successfully done. At this point, the LED indicator is still red and blinking. 6-2. -
Page 14: Connection With The Air2
6-2-1. Connection with the Air2 CardVibroAir2 icon will appear in the tablet PC display once the program is correctly installed. Go to the CardVibroAir2 main menu by touching the icon. WiFi Portable Vibrometer VM-2012 Air2 14/52... - Page 15 Touch “Scan” in the lower right corner of the main menu. Turn on the Air2 and make sure the red LED indicator is blinking. Active Air2 device number(s)* will appear. Select the device and touch “Connect.” The selected device number will be indicated as Sensor Type in the top of main menu page. *The device number is the SSID number indicated in the label on your Air2 body.
-
Page 16: Oa Vibration Measurement
6-2-2. OA Vibration Measurement Once the tablet PC is successfully connected to the Air2, touch the “OA Vib. Measure” icon in main menu. Touching the icon will lead you to the OA vibration measurement page. Be sure the message, “Ready,” is indicated below the device number in the display. If not, go back to the main menu and establish the connection. - Page 17 Select the size of the machine to see the judgment. And also User Judgment screen is showed at next page. WiFi Portable Vibrometer VM-2012 Air2 17/52...
- Page 18 You can select A(Acceleration), V(Velocity) and D(Displacement). WiFi Portable Vibrometer VM-2012 Air2 18/52...
-
Page 19: Data Save
Touch “Save” to save the data. You can move on to the next measurement, if needed. The saved data can be converted into a chart, etc by using the optional data management software (available at IMV). WiFi Portable Vibrometer VM-2012 Air2... -
Page 20: Fft/Wav Analysis
And also you can type a short sentence at the Note window, and you can find this note on the optional data management software(DB-2012). 6-2-5. FFT/Wav Analysis Touch the “FFT/Wav Analysis” icon in the main menu. Be sure the message, “Ready,” is indicated below the device number in the display at this point. If not, go back to the main menu and establish the connection. - Page 21 WiFi Portable Vibrometer VM-2012 Air2 21/52...
-
Page 22: Cursor
6-2-6. Cursor When tapping the graph window at twice, the cursor is displayed on the screen, and also disappeared as same way. You can move the cursor by using your finger and moving the finger on the screen. Also, the value of position indicated by cursor, is displayed at the bottom of the graph window. You can zoom in and out by two-finger swiping . -
Page 23: Top5
6-2-7. Top5 While the FFT graph is displayed, the “Top5” button is effective. This button identifies and displays frequency and amplitude information for the FFT’s five highest amplitude frequency components. On the Top5 screen, you can check the two checkboxes for displaying the cursors on the FFT graph. We show the sample image at next page. - Page 24 WiFi Portable Vibrometer VM-2012 Air2 24/52...
-
Page 25: Route Settings
6-2-8. Route Settings You can use a routing of measurement points from version “1.6.5”. This function shows the measurement point which you assigned the order by the management software “DB-2012” on your PC. So please refer the manual of “DB-2012” for details. When you download the database to Android Tablet, the Air2 software shows a first measurement point ( see left-side figure ), and press the “... -
Page 26: Settings
6-2-9. Settings You can set up the measurement conditions by going to settings menu in the FFT/Wave Analysis page. You can change various conditions such as measurement mode, full scale, end frequency, and so on. Mode: Select “Normal.” “Recorder” can be used to record the waveform. Duration can be set from 1 second up to 30 minutes depending on the end frequency. -
Page 27: Battery Exchange
6-3. Battery Exchange While measuring, the module identified number and battery voltage are displayed on the screen. This color has battery information as following. Blue : Waiting, not measuring once Green : Full charged Orange : Operatable voltage : Volatge level is low, please recharge the batteries When you find the “... -
Page 28: Usb Connection
6-4. USB Connection You can use USB Interface for measuring after the application version 2.6.0. If you want to get the data through USB interface, you have to use “ USB Host Cable “ for a Tablet. But that’s’ all. Connect a Tablet to Air2 device through USB Host Cable. -
Page 29: Utilities
7. UTILITIES Touch “Utilities” in the main menu to go to utilities menu. 7-1. Sensor You can set the sensitivity of the sensor/pickup. For the Air2, a piezoelectric sensor, VP-2012(A), and a low frequency sensor, VP2012PS1, are available. Use a piezoelectric pickup in regular operation. The VP2012PS1 can be used with the VM-2012C only. -
Page 30: Saved Data
7-2. Saved Data You can see the saved data on the tablet PC. When you touched the “ save data “ button, the following screen is displayed. If saved data is not shown, please the “ All “ button is pressed, all saved data is displayed on the screen as above. - Page 31 You can display the saved data, by checking the check box of data and touch the “ View “ button. In case of OA display In case of FFT/WV WiFi Portable Vibrometer VM-2012 Air2 31/52...
-
Page 32: Units
Also, by checking the check box and pressing “ Find “ button as following, you can list the specified kind of data. 7-3. Unit s Specify the units to show acceleration by m/s^2 or G. Metric : you can select “ m/s^2 “ or “ G “ for acceleration Velocity ->... -
Page 33: Memory
7-4. Memory You can see the data capacity used by Air2. 7-5. A Filter Select FMax for overall vibration acceleration measurements. And a High-Pass filter is to be set for Overall Displacement Measurement, Fc :10Hz for setting Low ( default ) Fc :20Hz for setting Middle Fc :30Hz for setting High WiFi Portable Vibrometer... -
Page 34: Dictionary
7-6. Dictionary This is a simple way for knowing Vibration technical term. You can find and search the technical term by input the keyword. When you select a technical term and touch the “ View ” button, the explanation is displayed. To quickly browse through available topics, enter the first letter of the topic you wish to explore. -
Page 35: Tx Settings
7-8. Tx Settings You can change the value of Tx Power, Channel. Default setting is fine for regular use. Inappropriate setting may disable the wireless connection. Default WiFi Portable Vibrometer VM-2012 Air2 35/52... -
Page 36: User Judgment Edit
Tx Power : Changeable from 1dB to 11dB, the default value is 1dB. Larger the Power setting, the transmit power is lager. You have to care the battery life, when you set the large power. Channel : Changeable from 1CH to 12CH, the default value is 1CH. If you find that Air2 Wifi channel is interfered by another Wifi instrument, please change the channel and set the other channel, pressing “... -
Page 37: Specifications
76.8kHz (max) AD Resolution 16bit Android3.2, Android4.1, Android4.2 Operational Tablet OS (See IMV website for update information). Manufactured Country Japan 8-2. Measurement Specifications Refer to the chapter 10-1 in the case you will use a low frequency vibration measurement pickup with the Air2 connector model. - Page 38 Items Specs Measurement Range: D Specified or Automatic 0 to 25µm (x200 Range) 0 to 50µm (x100 Range) 0 to 100µm (x50 Range) 0 to 250µm (x20 Range) 0 to 500µm (x10 Range) 0 to1000µm (x5 Range) 0 to2500µm (x2 Range) 0 to5000µm (x1 Range) OA Vibration Indicate the results of all modes (A, V, D, E1, E2, and E3)
- Page 39 WiFi Portable Vibrometer VM-2012 Air2 39/52...
-
Page 40: Vm-2012 Air2 Specifications
8-3. VM-2012 Air2 Specifications Items Specs Mass Approx. 145g Dimensions 40.5mm (W) x 88.6mm (H) x 41.5mm (D) Sensor Piezoelectric Accelerometer Acc. Frequency Range From 10 to 10kHz Vel. Frequency Range From 10 to 1kHz Disp. Frequency Range From 10 to 150Hz Max Measurement 500m/s²... -
Page 41: Vibration Evaluation Standard
9. VIBRATION EVALUATION STANDARD Evaluation Standard Loaded in the Air2 are as follows: Criteria Pickup (Sensor) Measurement Type ISO Vibration VM-2012 Vibration level (OA value*) Evaluation Standard VP-2012 Acc. Pickup measurement (Vibration Severity) (using VM-2012C) Velocity (V) value VM-2012 Vibration level (OA value) Bearing Evaluation VP-2012A Acc. -
Page 42: Bearing Evaluation
9-2. Bearing Evaluation In order to evaluate bearing, we have established the guideline using the value of the E3 envelope acceleration. The values in the chart below shall be applied only to the general guidelines. The best way to make a judgment on the severity is to take the trend of measurement results into consideration. Classes: (a) Class 1 Inner Diameter of the Bearing: From 200 to 500 mm... -
Page 43: Vm-2012C Connector Model
10. VM-2012C CONNECTOR MODEL VM-2012C does not have a built-in sensor. Instead, an external sensor (pickup) of your choice can be connected for vibration measurement. Below accessories are available for this Air2. ・VP-2012PS1 – Low Frequency Vibration Measurement Pickup ・CA-2012 – Charge Amplifier 10-1. - Page 44 Items Specs FFT/Wave Analysis Mode: A, V, or D Range: Specified, or Automatic FFT Measuremnt Conditions: Frequency: Selectable from below options A: 125 Hz V: 125 Hz D: 125 Hz Averaging: Stable, Exponential, Peak Hold : 1, 2, 4, 8 times Window: Hanning, Rectangular, Flat Top Measurement Type: Normal, Recorder Normal Measurement:...
- Page 45 Fig 1. VP-2012PS1 WiFi Portable Vibrometer VM-2012 Air2 45/52...
-
Page 46: Ca-2012 Charge Amplifier
10-2. CA-2012 Charge Amplifier Items Specs Gain 1m V/pC +/-0.3dB 以内 Capacitance 1000pF Frequency Range 3 to 10kHz +/- 0.5dB Max Output Voltage +/- 2V Power Supply DC +/-5V Output Impedance 100Ω Ambient Temp -20 to 80C Ground Case Material (Case) Cable Length 1.5m Connector... - Page 47 Fig 2. CA-2012 WiFi Portable Vibrometer VM-2012 Air2 47/52...
-
Page 48: Advanced Setting Of Android Tablet
11. Advanced Setting of Android Tablet Android OS and applications backup and version up their program automatically through an access point, it is very convenient for users. But our Air2 application have to connect to Air2 WiFi module, if the connect ion is shut down by automatic access to another access point, Air2 application can not receive measurement data. - Page 49 2) Location Access As above screenshots shows, please turn off Access to my location. 2) Backup & reset As above screenshots shows, please no check to check boxes. Regarding other Tablet PCs, they have same functions to control accessibility. please refer to their document and set them like the same.
-
Page 50: Radio Certification
12. RADIO CERTIFICATION Ｒ 005-100372(VM-2012) Ｒ 005-100373(VM-2012C) FCC ID:T9J-RN171 IC ID:6514A-RN171 CMIIT ID:2013DJ7665(VM-2012) CMIIT ID:2013DJ7666(VM-2012C) NCC ID: CCXXxxYYyyyZzW < NCC声明> 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫 療用電波輻射性電機設備之干擾。 MSIP-CRM-IMV-CardVibroAir2 WiFi Portable Vibrometer VM-2012 Air2 50/52... -
Page 51: Notes
・ Do not apply excess shock or pressure to the device. ・ Attach the device at appropriate area of the object of measurement. IMV accepts no responsibility for any damages in the specimen or an accident during use caused by wrong attachment. -
Page 52: Disributor
15. DISRIBUTOR < China > 北京航天村技术研究所 http://www.bjhtc.com/ 北京市丰台区马家堡西路 15 号时代风帆大厦 2-2602 室 TEL: +86(10)51662799 E-mail: bjhtc@vip.sina.com < Taiwan > 志隆國際科技有限公司 10046 台北市中正區懷寧街 112 號 3 樓 TEL: +886-2-23702678 E-mail: steven@g-long.com.tw < Korea > 韓國 TECH 41, Yeondeok-ro, 15beon-gil, Seongsan-gu, Changwon-si, Gyeongnam, Korea 642-290 TEL: +82-55-263-2262 E-mail: kankokutech@gmail.com WiFi Portable Vibrometer...