Using Usb - PrimeVOLT PV T U Series Installation & Operation Manual

7.5 Using USB

Plugging in USB Stick

To download the inverter data, please plug in a pre-formatted USB memory into the
USB interface beneath inverter. The stick must be FAT or FAT32 formatted.
Remove the cap and plug in a USB stick. If
inverter recognizes the device, the USB icon
on LCD screen will light up.
 Downloading Inverter Data
After plugging in the USB, all data stored in the inverter will be downloaded to the
stick automatically.
Data Format
There will be three data files downloaded. ErrorLog(errors
record), Power (historical power generation record) and
inverter2.sqlite.
Note on Firmware Upgrade
If the USB stick contains an update of firmware, the inverter will
not download data into USB stick but perform firmware
upgrade instead.
50