Pool Controls SWC Series User Manual page 17

Light Timer Menu
You can use your system to turn your pool or garden lighting on and off automatically, you
can set the ON and OFF times using the light timer menu.
Press ENT to access the Menu system. Press ENT again to select the TIMER menu and
then scroll down using the N/DOWN button until LIGHT MENU is displayed on the LCD.
Line 2 on the LCD will now read "AUTO? Y/N". To enable automatic light operation press
the Y/UP-button. Line2 will read "Auto ON" for short period before displaying "ON hh:mm".
Adjust the ON time using the Y/UP and N/DOWN-buttons and confirm by pressing ENT.
The LCD will now prompt you to set the OFF-time, which is accomplished using the Y/UP
and N/DOWN-buttons as before. Press ENT-to confirm the new OFF-time and the LCD
will return to the home screen.
To disable automatic light operation, access the LIGHT menu in the way described above
and when asked "AUTO? Y/N" - press the N/DOWN button. Line 2 will read "Auto OFF" for
short period then the system will return to normal operation and the light can only be
operated manually (see below for how to do this).
Manual Light Operation
If the system is turned on, the light can be turned on or off manually by pressing the Y/UP-
button.
If you have multi-coloured LED lights that cycle through different colours and requiring a
power pulse to change effects, you can hold down the Y/UP-button to cycle through the
options and release when the desired colour or effect is achieved.
Page
14