Align The Printer; If The Disc Is Not Centered Side To Side - Rimage Producer III Alignment Manual
Hide thumbs
Also See for Producer III:
- Manual (2 pages) ,
- User manual (24 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
6.
Align the printer.
a.
Slowly move the
lift arm down until the disc touches the recessed print pad.
Printer Button
Side to Side Alignment
Print Pad
b.
If the disc is not centered side to side on the print pad, align the printer side to side.
i.
Loosen the
side to side screws.
ii.
Slide the
printer, not the printer tray, until the disc is centered side to side on the print pad.
iii.
Tighten the
side to side screws.
Front to Back Screw
2000538_C
Side to Side Screws
Align the Printer
Lift Arm
Holding Pins
2
Advertisement
Table of Contents
Need help?
Do you have a question about the Producer III and is the answer not in the manual?