Troubleshooting; Installation - Zanussi ZOB9990X User Manual

3172746-000 In-Fr ZANUSSI 03/07/14 11:20 Página 17
Trouble shootings
The oven stops working
• Check the power connection.
• Check the fuses and the circuit breaker for your

installation.

• Make sure the timer is either in the manual or
programmed setting.
• Check the position of the function and temperature
setting.
The light inside the oven does not go on
• Change the bulb.
• Check that it has been properly inserted according
to the Instruction Manual.
The heating pilot light does not turn on
• Select a temperature.
• Select a function.
Installation
This information is exclusively for the installer, who is
responsible for the oven's assembly and electrical
connection. If you install the oven yourself, the
manufacturer will not accept liability for possible damage.
Prior to Installation
Please refer to electrical safety instructions on page 3 of
this manual before installation.
• To unpack the oven, pull on the tab located at the
bottom of the box and hold it by the side handles,
never by the oven door handle.
• The opening in the kitchen unit must be that indicated
on the diagram. The minimum size of the unit base
must be 550 mm.
www.zanussi.com
• It should only come on while the oven is heating up
to the temperature selected.
Oven smoking during use
• Normal during first use.
• Clean the oven regularly.
• Reduce the amount of grease or oil in the tray.
• Do not use temperatures higher than those
indicated in the cooking chart.
The expected cooking results are not
achieved
Check the cooking chart for guidance on how your
oven operates.
CAUTION
If these problems persist despite these tips,
contact Technical Service.
• With built-in multifunction ovens, the rear of the unit,
corresponding to the shaded area (A), must have
nothing projecting out (unit reinforcement, pipes,
sockets, etc.).
450
17