Table of Contents
Advertisement
Transporting
WARNING!
Keep the transportation height as low as possible. Make sure the total height of
the transportation is not more than the maximum allowed height.
WARNING!
Transport the compact skid on an open heavy-duty chassis. Do not use an enclosed
trailer because the stations surface could easily be damaged.
WARNING!
Do not throw the hooks over the roof. This can damage the paint and cause
corrosion or operation problems.
Obey the following instructions:
•
Protect the compact skid with wooden corners, plastic film, etc. The compact skid is
delivered unpacked from the factory as standard.
•
The compact skid is built to fit inside an ISO 40 HC (1AAA according to ISO 3874) type
shipping container. It can be transported on a dedicated sea container trailer using the
standard container attachment system.
￭
Incoming inspection at arrival
•
Visually check for any potential transportation damage(s). If any damages found, mark
and record them and immediately inform your local ABB representative or your ABB
sales contact.
•
Repair any damaged paint. See section,
•
Check that the compact skid corresponds to the delivery list and order. Record the
deviations (if any) and immediately inform your local ABB representative or ABB sales
contact.
Storing, lifting and transporting 33
Maintenance of painted surfaces (page
57).
Advertisement
Table of Contents
