Care And Maintenance - CDA CCA52 Installation, Use And Maintenance Manual

Care and Maintenance

IMPORTANT：DO NOT PERFORM MAINTENANCE OR CLEANING
OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and could erase the control panel
markings.
of water and mild detergent and drying to a shine with a clean cloth.
Cleaning the grease filter
The grease filter should be kept clean to minimize the risk of fire.
At least once a month the grease filters should be removed and
cleaned with warm soapy water. You can also wash the grease filters
in a dishwasher, ensuring that the filters are put in an upright position
to prevent damage from other items in the dishwasher. After rinsing and
drying, replace the filter.
To remove the grease filter, push in the button on the handle and then
pull down on the filter at the front. When you have released it at the
front, then you can pull out the filter. To replace the grease filter, repeat
the steps in reverse.
Please note:
Cleaning the grease filter in the dishwasher
may lead to discolouration.
This is normal and does not constitute a fault
with the appliance.
Please note:
Fig. 2
The extractor must not be used without the grease filter in place.
5